JS3
The JS3 is a passive three-way microphone splitter that sends one mic signal to three destinations at once, using two transformer-isolated outputs and one direct output. It suits live sound, monitor and recording setups where one source must feed several mixers.
- Passive 3-way balanced mic splitter
- One direct output plus two transformer-isolated outputs
- Jensen transformer for isolation and low distortion
- Output ground lifts to reduce hum and buzz
- Input pad allows line-level sources
- Rack mountable; up to eight in a Radial J-Rak
Ritratti
7Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ JS3, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The JS3 takes a single balanced microphone signal on an XLR input and distributes it to three outputs without active electronics. One output is a direct feed, and the other two pass through a Jensen transformer for galvanic isolation, which breaks ground loops and removes the hum and buzz they cause. The transformer is described as offering a very wide bandwidth with very low distortion and phase shift.
Ground lifts on the outputs give further control over noise, and an input pad lets line-level sources be connected as well as microphones. A typical use is feeding a main mixer, stage monitors and a recorder from the same microphone at the same time.
The JS3 can be rack mounted for touring or installation. Up to eight units fit in the Radial J-Rak, and the related J-Rak 4, J-Rak 8, J-Clamp and TrainTrack Plus accessories cover rack, desktop and pedalboard mounting.
Vidjo
Speċifikazzjonijiet
- Marka
- Radial Engineering
- Mudell
- JS3
- Kategorija
- Ħoss ħaj › Ħoss ħaj ieħor
Inputs
- Input connector
- XLR
- Input pad
- Yes, allows line-level sources
- Input type
- Balanced microphone signal
Outputs
- Number of outputs
- 3
- Direct output
- 1
- Transformer-isolated outputs
- 2
- Output ground lifts
- Yes
Audio
- Splitter type
- Passive 3-way microphone splitter
- Transformer
- Jensen
- Isolation
- Galvanic isolation on isolated outputs
- Ground loop noise
- Eliminates hum and buzz caused by ground loops
Physical
- Rack mounting
- Up to 8 in the Radial J-Rak
- Compatible rack adapters
- J-Rak 4, J-Rak 8
- Desktop/rack flange mount
- J-Clamp
- Pedalboard mounting
- TrainTrack Plus brackets
General
- Manufacturer
- Radial Engineering
- Part number
- R800 1023 00
- Power
- Passive (no power required)