QII-Eighty
The QII-Eighty is an 80-watt mono valve power amplifier designed by Tim DeParavicini, drawing on the original QUAD II. It suits listeners who want a traditional valve amplifier with a selectable 4 or 8 ohm output.
- 80 W RMS mono valve power amplifier
- Four KT88 output valves in two push-pull pairs
- Partial cathode loading in the output transformer
- Selectable 4 or 8 ohm output impedance
- 1 V RMS input for full output
- Designed by Tim DeParavicini
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao QII-Eighty, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The QII-Eighty is a mono power amplifier that continues the design approach of Peter Walker's original QUAD II. Tim DeParavicini designed it, and it delivers 80 W RMS into a selectable 4 ohm or 8 ohm load.
The output stage uses four KT88 valves arranged as two push-pull pairs. The output transformer uses partial cathode loading, which is a characteristic QUAD topology. The signal path also uses two 6SL7 valves and one 6SN7 valve, and the specification lists EF86 valves alongside the distortion figures. Full output needs a nominal 1 V RMS input signal.
Measured performance includes a frequency response of 10 Hz to 30 kHz (+0 dB, -0.5 dB) and 3 Hz to 50 kHz (-3 dB), a damping factor of 16 at 1 kHz referred to 8 ohms, and residual hum and noise better than -94 dB. Maximum power consumption is 240 VA.
Specifikacije
- Marka
- Quad
- Model
- QII-Eighty
- Kategorija
- Hi-Fi i kućni audio › Pojačala
Inputs
- Input sensitivity (nominal)
- 1V RMS for full output
Outputs
- Power output
- 80W RMS
- Output impedance
- 4 Ohms or 8 Ohms, selectable
Audio
- THD @ 80 Watts
- 2 x EF86
- THD 30Hz - 15kHz
- 0.5%
- THD 20Hz - 20kHz
- 1.0%
- Residual hum and noise
- Better than -94dB
- Frequency response
- 10Hz - 30kHz (+0dB, -0.5dB)
- Frequency response (-3dB)
- 3Hz - 50kHz (-3dB)
- Damping factor
- 16 @ 1kHz (referred to 8 Ohms)
Valves
- Output valves
- 4 x KT88
- Driver valves
- 2 x 6SL7
- Phase splitter valve
- 1 x 6SN7
- Channel configuration
- Mono power amplifier
Power
- Power consumption
- 240VA maximum