12sHO
The 12sHO is a 400 W active studio subwoofer with a 12" woven Kevlar woofer, intended to extend the low end of near-field monitors in stereo or surround setups. It has a dedicated LFE input, a sweepable crossover and an included bypass footswitch.
- 12" woven Kevlar woofer, 400 W Class A/B amplifier
- Bass extension to 29 Hz, max SPL 123 dB
- Dedicated LFE input plus L/R inputs and XLR outputs
- Sweepable crossover control
- Bypass footswitch included
- Reinforced MDF enclosure, 49.7 kg
Photos
6Listings
No listings of this model yet
When someone sells a 12sHO, the listings and the sales history will show here.
Sell one like thisDescription
The 12sHO is a front-loaded, vented active subwoofer built for studios that need to reproduce deep bass and the LFE channel of surround formats at high levels. It uses a 12" woven Kevlar woofer driven by a 400 W Class A/B amplifier, with a quad-vented front-firing port. Bass extends down to about 29 Hz and the maximum peak SPL is 123 dB.
For integration, it has combo XLR/quarter-inch TRS inputs for left and right, a separate LFE input and balanced XLR outputs for passing the signal on. A sweepable crossover sets the hand-off to the main monitors, a ground lift switch is fitted, and the high-pass filter can be bypassed with the supplied footswitch. Indicators show power, protection and limiter status.
The enclosure is reinforced MDF (18 mm and 36 mm) with a textured paint finish. The mains input is selectable between 110–120 V and 220–240 V. The cabinet weighs 49.7 kg (109.7 lb).
Video
Specifications
- Brand
- KRK
- Model
- 12sHO
- Category
- Studio › Studio monitors
Audio
- Configuration
- Front Loaded, Vented Subwoofer
- System type
- Active Subwoofer
- Low-frequency transducer
- 12" Woven Kevlar® High Performance Woofer
- Frequency response
- 29.2Hz - 160Hz (L/R inputs), 29.1Hz - 211Hz (LFE input)
- Max peak SPL
- 123 dB
- Signal to noise ratio
- 92 dB
- Crossover
- Sweepable
Amplifier
- Amplifier class
- Class A/B
- Power output (continuous)
- 400 Watts @ 1% THD+N @ 100Hz
- Distortion (THD+N)
- ≤ 0.1% @ -3dB of max power output, 20Hz-200Hz
Inputs
- L/R inputs
- Combo XLR-1/4" TRS, balanced
- LFE input
- Combo XLR-1/4" TRS, balanced XLR
- Input impedance
- 10 KΩ Balanced or Unbalanced
Outputs
- Output connectors
- Balanced XLR for Left & Right
Controls and indicators
- Ground lift
- On/Off
- HPF bypass
- With Footswitch Only
- Indicators
- Power, Protection, Limiter
Power
- AC power input
- Selectable 110V-120V / 220V-240V
Physical
- Enclosure
- 18mm & 36mm Reinforced MDF
- Finish
- Textured Paint
- Dimensions (H x W x D)
- 20" (508 mm) x 20" (508 mm) x 22.48" (571 mm)
- Weight
- 109.7 lb. (49.7 kg)
In the box
- Footswitch
- Included