F300i
Compact two-way, rear-ported bookshelf speaker with a 125mm multi-fibre bass/mid driver and a 25mm titanium dome tweeter. It suits two-channel hi-fi or home cinema use, including wall-mounting as a rear effects speaker.
- 2-way, rear-ported bookshelf speaker, sold as a pair
- 125mm multi-fibre bass/mid driver and 25mm titanium dome tweeter
- Rear-panel bracket for flush wall mounting
- 87dB sensitivity, 8 ohm nominal impedance
- Recommended amplifier power 20 - 70W RMS
- Finishes: Walnut, Black Ash, Light Oak
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ F300i, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The F300i is a small two-way bookshelf loudspeaker sold as a pair. It is an update of the earlier F300, with a revised titanium tweeter and crossover that give it a more refined treble. A 125mm multi-fibre driver handles bass and midrange, and a 25mm titanium dome handles the highs, crossing over at 3.4kHz.
The cabinet is rear ported and compact, at 250 x 156 x 211mm and 3.7kg each. A bracket built into the rear panel lets the speaker be mounted flush against a wall, which helps where space is tight or when it is used as a surround or rear effects speaker in a home cinema system.
Sensitivity is 87dB with a nominal 8 ohm impedance. The recommended amplifier power is 20 to 70 watts RMS, and the speaker is rated for 35 watts RMS continuous. It connects to an amplifier or AV receiver through its rear terminals. Finishes are Walnut, Black Ash and Light Oak.
Vidjo
Speċifikazzjonijiet
- Marka
- Fyne Audio
- Mudell
- F300i
- Kategorija
- Hi-Fi u awdjo tad-dar › Speakers
Audio
- System type
- 2 way, rear ported
- Drive unit complement
- 1 x 125mm multi-fibre bass / mid, 1 x 25mm titanium dome tweeter
- Frequency response (-6dB typical in room)
- 54Hz - 34kHz
- Sensitivity (2.83 Volt @ 1m)
- 87dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 3.4kHz
- Crossover type
- 2nd order low pass, 3rd order high pass
Power
- Recommended amplifier power
- 20 - 70 Watt RMS
- Continuous power handling
- 35 Watt RMS
Physical
- Dimensions (H x W x D)
- 250 x 156 x 211mm (9.8 x 6.1 x 8.3")
- Net weight (each)
- 3.7kg (8.2lb)
- Finishes
- Walnut / Black Ash / Light Oak
- Mounting
- Rear-panel bracket for flush wall mounting
- Sold as
- Per pair
General
- SKU
- F8000050
- Series
- F300i Series
- Applications
- Bookshelf, Home Theatre, Hi-Fi