iTrack Solo
The iTrack Solo is a two-input USB audio interface with a mic preamp and an instrument input, built for recording on Mac, PC and Lightning iPads. It suits songwriters and home recordists who want a simple, bus-powered way to capture and monitor audio.
- 1 XLR mic input and 1 ¼" instrument input
- 48V phantom power and direct monitor switch
- Up to 96 kHz on Mac/PC, 48 kHz on iPad
- USB 2.0 bus power; mains needed with iPad
- DEVICE LINK port for Lightning iPads
- Includes Ableton Live Lite 9 and Scarlett plug-ins
Photos
8Listings
No listings of this model yet
When someone sells a iTrack Solo, the listings and the sales history will show here.
Sell one like thisDescription
The iTrack Solo combines an XLR microphone input with a separate ¼" unbalanced instrument input, each with its own gain control and a gain halo that shows signal level. A 48V phantom power switch serves condenser microphones, and a direct monitor switch lets the player hear the input without latency. A large monitor dial sets the level of the headphone output and the line outputs.
Playback goes through two unbalanced RCA phono outputs for speakers and a ¼" TRS headphone jack. Conversion runs at up to 96 kHz on Mac and PC, and at 44.1 or 48 kHz on iPad. The interface is housed in a bead-blasted aluminium case.
On a computer it connects over USB 2.0 and takes its power from the USB port. For a Lightning iPad it uses a DEVICE LINK port and cable, and in that case the unit needs to be plugged into mains power. Ableton Live Lite 9 and the Scarlett plug-in suite are included for Mac and PC use.
Video
Specifications
- Brand
- Focusrite
- Model
- iTrack Solo
- Category
- Studio › Audio interfaces
Inputs
- Microphone input
- 1 x XLR
- Instrument input
- 1 x ¼" unbalanced
- Gain knobs
- 2
- Gain halo signal indicators
- 2
- Phantom power
- 48V switch
- Mic gain range
- +10dB to +55dB
- Mic max input level
- +4dBu
- Instrument gain range
- -10dB to +55dB
- Instrument max input level
- +2dBu
Outputs
- Monitor outputs
- 2 x unbalanced RCA phono
- Headphone output
- 1 x ¼" TRS jack
- Nominal output level
- 0dBFS = 10dBu, unbalanced
- Monitor level dial
- Controls headphone and line level outputs
- Direct monitor
- Switch
Connectivity
- USB
- USB 2.0 port
- iPad connection
- DEVICE LINK port
- Security
- Kensington Lock slot
- Compatible iPads (Lightning model)
- Any iPad with Lightning connector
- Compatible iPads (standard model)
- iPad (1st gen), iPad (2nd gen) and iPad (3rd gen)
Audio
- Supported sample rates (Mac and PC)
- 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Supported sample rates (iPad)
- 44.1 kHz, 48 kHz
- A-D dynamic range
- 105dB A-weighted (converter chipset 114dB)
- D-A dynamic range
- 105dB A-weighted (converter chipset 114dB)
- Mic frequency response
- 20Hz - 20kHz +/- 0.2 dB
- Mic THD+N
- < 0.002%
- Mic EIN
- < -120dB
- Instrument THD+N
- 0.003%
- Output THD+N
- < 0.001%
- Clock source
- Internal clock only
Power
- Power (computer)
- USB bus powered
- Power (iPad)
- Mains connection required
Physical
- Height
- 45 mm / 1.77"
- Width
- 150 mm / 6"
- Depth
- 100 mm / 4"
- Weight
- 500 g / 1 lb
- Case
- Bead-blasted aluminium
Software
- Included software
- Ableton Live Lite 9
- Included plug-ins
- Focusrite Scarlett plug-in suite
In the box
- Interface
- iTrack Solo
- USB cable
- 1.2m
- DEVICE LINK cable
- 1.2m, for Lightning iPad
- Documents
- Getting started guide, registration card
- Software download card
- Ableton Live Lite / Scarlett Plug-in Suite
- USB power supply
- US only