Hoof Reaper

The pedal puts three separate effects in one box: a Muff-style germanium/silicon hybrid fuzz (Hoof), a vintage-style silicon/germanium hybrid fuzz based on the three-knob bender (Tone Reaper), and a classic monophonic octave up. Each has its own footswitch, so any one can be used alone or combined in series. The order of the effects is fixed. Seven switching combinations are available, from a single effect up to all three together.

The Hoof section has Level, Fuzz, Tone and Shift controls. Shift changes the response of the tone control, scooping the mids when turned clockwise and emphasising them when turned counterclockwise. The Tone Reaper section has Level, Fuzz and Tone controls. The octave is monophonic, so it is more pronounced on the neck pickup and when playing above the 12th fret. It was first released as a limited run in 2010 and later returned to the regular line.

It uses relay-based true bypass (Flexi-Switch), which allows both latching and momentary operation. Because the switching is relay based, the pedal needs power to pass signal. It runs from a 9 V DC supply with a 2.1 mm negative-centre barrel connector and draws 18 mA. A limited lifetime warranty applies.