Diamond Jubilee MC
Moving-coil phono cartridge with a zirconium oxide body, 24-carat gold coils and a boron cantilever with a Micro-HD diamond. It is aimed at turntable owners who want a high-output-accuracy MC cartridge built on Goldfinger Statement technology.
- Moving-coil cartridge with zirconium oxide body
- 24-carat gold coils, as in the Goldfinger Statement
- Boron cantilever, Micro-HD diamond (Prime Line PLUS)
- Output 0.6–0.65 mV at 5 cm/s, 50 Ω impedance
- Channel separation > 35 dB, balance < 0.15 dB
- Recommended tracking force 2.8 g (± 0.2 g)
Photos
6Listings
No listings of this model yet
When someone sells a Diamond Jubilee MC, the listings and the sales history will show here.
Sell one like thisDescription
The Diamond Jubilee MC is a low-output moving-coil cartridge whose body is made of zirconium oxide, a very hard and rigid material chosen to damp resonances. The body is manufactured to tolerances of up to 0.001 mm.
The generator carries over ideas from the Goldfinger Statement V2.1: very thin 24-carat gold coil wire and an integrated high-frequency shield first used in the Goldfinger Statement V1. A revised magnet layout with strong neodymium magnets, reworked coil geometry and a redesigned cantilever set at an optimised angle are meant to improve dynamics, resolution and tracking accuracy. The stylus is a boron cantilever with a Micro-HD diamond in the clearaudio Prime Line PLUS profile.
Channel separation is above 35 dB and channel balance is better than 0.15 dB. Output is 0.6 to 0.65 mV at 5 cm/s with a 50 Ω system impedance, so it needs an MC-capable phono input or step-up stage. The cartridge is supplied under an acrylic pyramid cover, and the maker gives a 2-year warranty when the warranty card is returned within 14 days of purchase.
Video
Specifications
- Brand
- Clearaudio
- Model
- Diamond Jubilee MC
- Category
- DJ gear › Cartridges and styli
Audio
- Type
- Moving coil (MC)
- Frequency response
- 20 Hz – 20 kHz
- Output voltage (at 5 cm/s)
- 0.6 – 0.65 mV
- Channel separation
- > 35 dB
- Channel balance
- < 0.15 dB
- System impedance
- 50 Ω
Stylus and Generator
- Cantilever / diamond cut
- Boron / clearaudio Prime Line PLUS
- Diamond
- Micro-HD diamond
- Stylus compliance
- 18 µ/mN
- Tracking ability
- ≤ 100 µm
- Recommended tracking force
- 2.8 g (± 0.2 g)
- Coil arrangement
- Absolutely pivot-point symmetrical
- Coil material
- 24-carat gold
Physical
- Weight
- ~ 9.25 g (± 2 g)
- Body material
- Zirconium oxide
- Manufacturing tolerance
- Up to 0.001 mm
Warranty
- Manufacturer warranty
- 2 years (warranty card returned within 14 days of purchase)