RØDE NT1 Signature Series – Ultra-Low Noise Studio Condenser Microphone Kit

The RØDE NT1 Signature Series delivers pristine, ultra-low noise performance in a complete recording solution.

Key Features

• Ultra-low noise floor: With just 4 dBA self-noise, it captures subtle nuances with minimal hiss
• Large-diaphragm cardioid condenser capsule: The 1-inch HF6 true condenser captures rich detail and clarity on voice and acoustic instruments
• Transformerless JFET circuitry: A JFET impedance converter with bipolar output buffer keeps the signal clean and transparent
• Wide frequency and dynamic range: 20 Hz to 20 kHz response and 142 dB SPL handling for versatility in recording
• Complete recording kit: SM6 shock mount with detachable pop filter and a premium XLR cable for immediate studio readiness

Customer Benefits

From first take to final mix, the NT1 Signature Series delivers crystal-clear capture with no intrusive noise, so your performances shine through. The full accessory kit simplifies setup and keeps recording focused, whether for vocals, acoustic instruments, or stream content.

Quick Specs

• Acoustic principle: Pressure gradient
• Capsule: 1-inch HF6 true condenser
• Polar pattern: Cardioid
• Address type: Side-address
• Frequency response: 20 Hz to 20 kHz
• Maximum SPL: 142 dB SPL
• Self-noise: 4 dBA (A-weighted)
• Output impedance: 100 Ω
• Sensitivity: -32 dB re 1 V/Pa (25 mV at 94 dB SPL), ±2 dB at 1 kHz
• Power requirement: 48 V phantom (P48)
• Connector: 3-pin XLR
• Weight: 313 g
• Dimensions: 52 x 52 x 189 mm

In the Box

• RØDE NT1 Signature Series microphone
• SM6 shock mount with detachable pop filter
• Premium XLR cable
• 10-year warranty (after registration)

Use Cases / Ideal For

Ideal for vocal recording, podcasting, voiceover, acoustic instruments, and professional streaming, especially where ultra-quiet recording and ease of setup are essential.

Compatibility

Works with any standard XLR microphone input supplying 48 V phantom power. Pairs with audio interfaces, preamps, or mixing consoles for studio or broadcast-quality recordings.

Pros and Cons

✅ Pros:

• Exceptional low-noise performance (4 dBA) for ultra-clear recordings
• Complete kit with SM6 shock mount, pop filter, and XLR cable, studio-ready out of the box
• High 142 dB SPL handling and full 20 Hz to 20 kHz range for versatile sources

⚠️ Cons:

• Fixed cardioid pattern with no selectable polar patterns
• No onboard high-pass filter or pad, so filtering is handled at your interface or in software
• Requires 48 V phantom power from an interface, preamp, or mixer