RBN-1
Touch-sensitive ribbon controller for adding pitch bend, vibrato and modulation sweeps to a performance. It suits players of synths and modular systems that have an expression pedal input, or those using the matching Eurorack receiver module.
- 581 x 35 x 8.6 mm ribbon controller
- Works with any expression pedal input
- 3.5mm TRS plug, 6.35mm adapter included
- Magnetic base with non-slip rubber backing
- Milled aluminium housing, soft-touch surface
- Pairs with RBN-1-C Eurorack module
Fotos
8Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um RBN-1, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The RBN-1 is a 581 mm long ribbon strip with a soft-touch, low-friction surface that registers both broad sweeps and small vibrato movements. Its adaptive bend behaviour lets a played note be bent across several octaves, depending on the note that was originally played.
It connects to any device with an expression pedal input, using a 3.5mm TRS plug or a 6.35mm TRS plug via the supplied adapter. With the UDO Super 6 and Super 8 it uses the maker's pitch expression method, which bends only the notes currently held and leaves sustained sounds and reverb tails untouched. For Eurorack, the separate RBN-1-C receiver module adds two-touch control through CV / Gate outputs and a live looper with trig input.
The housing is milled aluminium, with a non-slip rubber base and magnets for attaching to any metal surface. The strip is wired to a 1.2m cable.
Vídeo
Especificações
- Marca
- UDO Audio
- Modelo
- RBN-1
- Categoria
- Sintetizadores e teclados › Teclados e controladores MIDI
Connectivity
- Connections
- 3.5mm TRS plug or 6.35mm TRS plug (adapter included)
- Connection type
- 3.5mm TRS plug with 6.35mm stereo TRS adapter; tip: wiper, ring: right end (connector), sleeve: left end
- Cable length
- 1.2m
- Compatibility
- Any device with an expression pedal input
Electrical
- Maximum voltage
- 30V
- Potentiometer impedance
- 20kΩ
- Potentiometer taper type
- Linear
Physical
- Dimensions (L/W/D)
- 581 x 35 x 8.6mm (not including cable)
- Housing
- Milled aluminium
- Surface
- Soft-touch, low-friction
- Base
- Non-slip rubber
- Attachment
- Magnetic base for attaching to metal surfaces
Features
- Pitch bend
- Adaptive bend behaviour, several octaves
- Super 6 / Super 8 mode
- Bends only currently held notes
- Eurorack option
- RBN-1-C receiver module
In the box
- Included
- RBN-1 ribbon with cable
- Adapter
- 6.35mm TRS adapter