US-366
The US-366 is a bus-powered USB 2.0 audio interface in an aluminium case with two mic/line inputs, HDDA preamps and an on-board DSP mixer. It suits home and mobile recording up to 24-bit/192 kHz. The model has been discontinued.
- 2 HDDA mic preamps on XLR/TRS combo inputs with +48V phantom power
- Records up to 24-bit/192 kHz over USB 2.0
- On-board DSP mixer with two modes and DSP effects (44.1/48 kHz)
- RCA LINE I/O 3-4 switchable between input and output
- Coaxial and optical digital I/O (S/P DIF, AES/EBU output option)
- USB bus-powered; ASIO 2.0/WDM and Core Audio drivers
Bilder
6Annonser
Ingen annonser for denne modellen ennå
Når noen selger en US-366, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The US-366 combines two XLR/TRS combo inputs with phantom power, a built-in DSP mixer and DSP effects. The mixer offers two operation modes for low-latency monitoring and is opened from a dedicated Mixer Panel button on the unit. The effects work at 44.1 and 48 kHz sampling rates. Recording runs at up to 24-bit/192 kHz, which is higher than the 96 kHz limit of the sister model US-322.
On the back there are two balanced TRS line outputs, a pair of RCA connectors that can be switched between input and output, and coaxial and optical digital I/O, with one digital input connector active at a time. At 192 kHz the RCA outputs carry the same signal as the digital output. A headphone output with a large line-out volume knob sits on the front and top of the desktop case, and a remote jack accepts the optional RC-3F footswitch.
The interface connects over USB 2.0 and draws its power from the bus, so it works with a laptop. It uses ASIO 2.0 and WDM drivers on Windows and Core Audio on Mac. Cakewalk SONAR X3 LE (Windows) and Ableton Live Lite 9 (Mac and Windows) are included.
Video
Spesifikasjoner
- Merke
- Tascam
- Modell
- US-366
- Kategori
- Studio › Lydkort
Audio
- Supported sampling frequency
- 44.1/48/88.2/96/176.4/192kHz
- Supported bit rate
- 16/24bit (Internal operation is 24bit)
- ADC chip set dynamic range
- 102dB (FS=48kHz, A-Weight)
- DAC chip set dynamic range
- 106dB (FS=44.1kHz, A-Weight)
- THD
- 0.0045% or less
- S/N ratio
- 98dB or more
- EIN
- -120dBu or less
- Frequency response (MIC IN to LINE OUT)
- 10Hz to 68kHz, +0.5/-3.0dB
- Frequency response (MIC IN to PHONES)
- 10Hz to 30kHz, +0.5/-1.0dB
Inputs
- MIC IN (INPUT 1/L, 2/R)
- XLR-3-31, balanced
- MIC IN input impedance
- 2.2kohms
- MIC IN nominal input level
- -65dBu (INPUT: MAX) / -22dBu (INPUT: MIN)
- MIC IN maximum input level
- -6dBu (INPUT: MIN)
- LINE IN (INPUT 1/L, 2/R)
- 6.3mm (1/4") TRS jack, balanced
- LINE IN input impedance
- 15kohms (LINE) / 1Mohms (GUITAR)
- LINE IN maximum input level
- +20dBu (LINE) / +4dBV (GUITAR)
- LINE IN (LINE I/O 3-4)
- RCA pin-jack, 15kohms, -10dBV nominal, +6dBV max
- Digital inputs
- Coaxial RCA and optical TOS, IEC60958-3 (S/P DIF)
Outputs
- LINE OUT 1/L, 2/R
- 6.3mm (1/4") TRS jack, balanced, 100ohms
- LINE OUT nominal / maximum level
- +4dBu / +20dBu
- LINE OUT (LINE I/O 3-4)
- RCA pin-jack, 200ohms, -10dBV nominal, +6dBV max
- Digital outputs
- Coaxial RCA and optical TOS, S/P DIF or AES/EBU
- PHONES connector
- 6.3mm (1/4") stereo phone jack
- PHONES maximum output level
- 18mW+18mW or more (THD+N 0.1% or less, 32ohms)
Connectivity
- USB
- USB B type 4-pin, USB2.0 HIGH SPEED mass storage class
- REMOTE
- 2.5mm TRS jack, dedicated protocol for RC-3F (Mackie Control or HUI emulation)
- Windows drivers
- ASIO2.0, WDM(MME)
- Mac driver
- Core Audio
Power
- Power
- USB bus powered (5V, Max 500mA)
- Power consumption
- 2.5W
Physical
- Dimensions
- 140(W)×42(H)×140(D)mm
- Weight
- 500g
- Operating temperature
- 5-35˚C
In the box
- Bundled software
- Cakewalk SONAR X3 LE (Windows), Ableton Live Lite 9 (Mac OS X/Windows)