TM-180
The TM-180 is a cardioid large diaphragm condenser microphone with a 34 mm aluminum diaphragm, aimed at home and project-studio recording alongside audio interfaces and portable multitrack recorders. It has been discontinued by the maker.
- 34 mm aluminum diaphragm condenser capsule
- Cardioid (unidirectional) pickup pattern
- Needs 48 V phantom power
- Max SPL 130 dB, S/N ratio 79 dB
- 3-pin male XLR output
- Includes suspension shockmount and cases
Fotografije
7Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao TM-180, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The TM-180 is a side-address style condenser microphone built around a 34 mm aluminum diaphragm with a cardioid pickup pattern, which favors sound arriving from the front and reduces pickup from the sides and rear. It is positioned for music creation with audio interfaces and portable studio recorders.
The microphone covers 20 Hz to 20,000 Hz and has a sensitivity of -35 dB ±2 dB at 1 kHz. It handles sound pressure levels up to 130 dB and has a signal-to-noise ratio of 79 dB, so it can be used on both quiet and louder sources. Output impedance is 200 Ω and the recommended load impedance is above 1 kΩ.
It connects through a 3-pin male XLR and needs 48 V phantom power from a preamp, interface or mixer. A suspension shockmount with a 5/8 inch thread is supplied, along with a 5/8 to 3/8 inch conversion adapter, a hard case and a soft case. The body measures 50 × 190 × 50 mm and weighs 420 g.
Videozapis
Specifikacije
- Marka
- Tascam
- Model
- TM-180
- Kategorija
- Studio › Mikrofoni
Audio
- Type
- Condenser
- Diaphragm
- 34 mm aluminum
- Directivity
- Cardioid
- Frequency response
- 20Hz - 20,000Hz
- Sensitivity
- -35dB +/-2dB (0dB=1V/Pa at 1kHz)
- Max. SPL
- 130dB
- S/N ratio
- 79dB
Outputs
- Output impedance
- 200Ω
- Load impedance
- >1kΩ
- Connector
- 3 pin XLR, Male
Power
- Phantom power
- 48V
Physical
- Dimensions
- 50(W) × 190(H) × 50(D) mm
- Weight
- 420g (Microphone body only)
In the box
- Shockmount
- Suspension shockmount (Screw dia. 5/8 inch)
- Cases
- Hard case, Soft case
- Adapter
- 5/8 to 3/8 conversion adapter