Celesonic US-20x20
A 20-in/20-out USB 3.0/2.0 audio and MIDI interface in a one-rack-space case, with eight mic preamps, ADAT and S/PDIF digital I/O, word clock and a built-in DSP mixer. It is aimed at home and project studios that need many channels and low-latency monitoring. The model has been discontinued.
- 20-in/20-out interface, up to 192kHz/24-bit
- 8 Ultra-HDDA mic preamps, 56dB gain, -125dBu EIN
- DSP mixer with 4-band EQ and compression per input
- Optical (S/MUX2, S/MUX4), coaxial S/PDIF and BNC word clock I/O
- USB 3.0/2.0 class-compliant, Windows, Mac, iPad/iPhone
- Interface, mixer and 8-channel mic preamp modes
Bilder
8Annonser
Ingen annonser for denne modellen ennå
Når noen selger en Celesonic US-20x20, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The Celesonic US-20x20 is a rack-mount audio interface offering 20 channels of analog and digital input and output at sample rates up to 192 kHz and 24-bit resolution. Eight Ultra-HDDA mic preamps with XLR/TRS combination inputs provide 56 dB of gain, with phantom power on all inputs and high-impedance inputs for instruments. Ten balanced TRS line outputs, two headphone outputs and MIDI in and out are also provided.
A built-in DSP mixer gives each input channel a 4-band EQ and compression, plus a stereo reverb for monitor mixes. A patch bay lets outputs be assigned freely, and up to 10 plus 1 named scenes can store mixer settings. The unit can run in three modes: audio interface, digital mixer, or 8-channel mic preamp.
It connects to a computer over USB 3.0 or USB 2.0 using class-compliant drivers, and works with Windows, macOS, iPadOS and iOS. Digital connections include optical multichannel input and output (S/MUX2 and S/MUX4), coaxial S/PDIF, and BNC word clock input and output. Rack-mount adapter, AC adapter, and USB 2.0 and USB 3.0 cables are included.
Spesifikasjoner
- Merke
- Tascam
- Modell
- Celesonic US-20x20
- Kategori
- Studio › Lydkort
Audio
- Sampling frequency
- 44.1k/48k/88.2k/96k/176.4k/192k Hz
- Quantization bit rate
- 16/24bit
- Frequency response (44.1k/48k Hz)
- 20Hz to 20kHz, +/-0.3dB (JEITA)
- Frequency response (88.2k/96k Hz)
- 20Hz to 40kHz, +/-0.3dB (JEITA)
- Frequency response (176.4k/192k Hz)
- 20Hz to 80kHz, +/-0.5dB (JEITA)
- THD
- 0.005% or less
- S/N ratio
- 104dB or more
- Crosstalk
- 100dB or more
Inputs
- Mic inputs (IN 1-8)
- XLR-3-31 balanced, 2.4k ohms input impedance, 56dB gain
- Mic max input level
- +8dBu (1.947Vrms)
- Instrument inputs (IN 1-2)
- 6.3mm (1/4") TS, 1M ohms or more, 56dB gain
- Line inputs, front (IN 3-8)
- 6.3mm (1/4") TRS balanced, 10k ohms, max +24dBu
- Line inputs, rear (IN 9-10)
- 6.3mm (1/4") TS (-10dBV) or TRS (+4dBu), 10k ohms
- Digital input, coaxial
- RCA, IEC60958-3 (S/PDIF), 75 ohm
- Digital input, optical
- JEITA RC-5720C, S/MUX4 at 88.2k-192k Hz
Outputs
- Line outputs (OUT 1-10)
- 6.3mm (1/4") TRS balanced, 100 ohms
- Line output level
- Nominal +4dBu, maximum +24dBu
- Digital output, coaxial
- RCA, IEC60958-3 (S/PDIF) / IEC60958-4 (AES/EBU)
- Digital output, optical
- JEITA RC-5720C, S/MUX4 at 88.2k-192k Hz
- Headphone output
- 6.3mm (1/4") stereo, 70mW+70mW or more (32 ohms)
Connectivity
- USB
- USB 3.0/2.0 B type; SuperSpeed (5Gbps) / High Speed (480Mbps)
- MIDI IN / OUT
- 5-pin DIN
- Word clock in
- BNC, 2.0Vpp to 5.0Vpp, 75 ohm
- Word clock out
- BNC, 2.0Vpp, 75 ohm, OUT/THRU switch
Software
- Windows drivers
- USB Audio Class 2.0, ASIO2.0, WDM (MME), MIDI
- Mac drivers
- Core Audio, Core MIDI
- Settings Panel (latest)
- V4.00 Windows, V2.10 Mac
- Firmware (latest)
- V2.00
Power
- Power supply
- Dedicated AC adapter (GPE248-120200-Z)
- Power consumption
- 20W
Physical
- Dimensions
- 445(W) × 59(H) × 222(D) mm / 17.52(W) × 2.32(H) × 8.7(D) inch
- Weight
- 2.7kg / 5.95lb
- Operating temperature
- 5 to 35˚C
In the box
- Included
- Rack mount adapter, USB 2.0 cable, USB 3.0 cable, user's manual, warranty card, dedicated AC adapter