NightSky
Stereo experimental reverb pedal with a variable-rate reverb core that changes size and pitch together, plus shimmer, glimmer, drive, a resonant filter, modulation and an eight-step sequencer. Aimed at guitarists, keyboard players and sound designers working in ambient and experimental textures.
- Variable-rate reverb core changes size and pitch together
- Sparse, dense and diffuse reverb textures
- Eight-step pitch sequencer with glide and scale quantizing
- 16 front-panel presets, 300 via MIDI
- 4-pole 24 dB/oct resonant low-pass filter
- Stereo I/O, MIDI DIN and USB, expression jack
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine NightSky, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
NightSky is a stereo reverb pedal built around a reverb core whose process rate can be changed, so the size and the pitch of the reverb move together. The pitch can be swept smoothly, quantized to half steps or to selectable scales, and stepped through an eight-step sequencer with adjustable glide. Three reverb textures are offered: sparse, dense and diffuse.
The voice section adds shimmer with selectable intervals up to plus or minus one octave, applied either at the reverb input or regenerating inside the core, along with a glimmer harmonic enhancer and pre or post drive. Tone shaping includes a low cut and a 4-pole 24 dB/octave resonant low-pass filter, which can be swapped for a regenerating high cut. A modulation section offers six waveforms aimed at the reverb delay lines, the core pitch or the filter. Morph moves between two sets of knob positions, and an Infinite footswitch freezes the input to the reverb core.
It stores 16 presets on the front panel and 300 via MIDI. Connections include stereo inputs and outputs, an expression or MultiSwitch Plus jack, 5-pin MIDI in and out, and USB. The dry path is analog, and bypass is either true bypass or buffered.
Físeán
Sonraíochtaí
- Branda
- Strymon
- Samhail
- NightSky
- Catagóir
- Éifeachtaí agus pedail
Inputs
- Inputs
- Stereo, high impedance, ultra low-noise discrete Class A JFET preamp (Left In for mono)
- Input level switch
- INST / LINE (LINE gives an additional 10dB of clean headroom)
- Audio input impedance
- 1M Ohm
Outputs
- Outputs
- Stereo, low impedance (Left Out for mono)
- Audio output impedance
- 100 Ohm
Connectivity
- MIDI
- 5-pin DIN in/out, supporting MIDI CCs, program changes and MIDI clock sync
- USB
- MIDI control from a computer and firmware updates
- Expression jack
- Expression pedal, MultiSwitch Plus or 1/4" to MIDI cable
- Presets
- 16 on the front panel, 300 via MIDI
Audio
- Converters
- 24-bit 96kHz A/D and D/A
- DSP
- SHARC, 32-bit floating point processing
- Frequency response
- 20Hz to 20kHz
- Dry path
- Analog, zero latency
- Bypass
- True Bypass (electromechanical relay) or selectable Analog Buffered Bypass
- Filter
- 4-pole 24dB/octave low pass with adjustable resonance
- Shimmer
- Pitch shifting up to +/- 1 octave
- Pre-delay
- 0 to 500ms
Power
- Power requirements
- 9VDC center negative, 300mA minimum (power supply not included)
Physical
- Dimensions (D x W x H)
- 4.5" (11.43 cm) x 7" (17.78 cm) x 2.4" (6.1 cm)
- Chassis
- Anodized dark blue aluminum
- Footswitches
- On, Favorite, Infinite
- Origin
- Designed and built in the USA