Lex V2
Lex V2 is a compact rotary speaker pedal that models a bass rotor, treble horn, tube preamp and microphone placement. It is aimed at guitarists, keyboardists and studio users who want a rotary sound with MIDI control and stereo routing.
- Rotary speaker with bass rotor, treble horn and tube preamp
- Mono or stereo input via TRS jack and rear switch
- Full MIDI over EXP/MIDI jack or USB-C, 300 preset locations
- MIDI Clock Sync for rotor speed, saved per preset
- Bi-Amp and Cab Filter Live Edit settings
- True bypass (default) or buffered bypass
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Lex V2, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
Lex V2 emulates a complete rotary speaker cabinet: a low-frequency rotor, a rotating treble horn, a tube-driven preamp stage and adjustable microphones. Controls include horn level, dry mix, mic distance, preamp drive, speed, volume (+/-6 dB) and ramp time, plus a front/rear mic position switch. A Slow/Fast footswitch changes rotor speed, and holding it brakes the rotors to a stop.
Two Live Edit settings extend the basics. Bi-Amp mode sends the horn signal to the left output and the woofer signal to the right output. Cab Filter reshapes the response for use with an interface, mixer or full-range speakers instead of a guitar amp. Bypass can be set to relay-switched true bypass (the default) or buffered bypass, and input level can be set to instrument or line, which adds 10 dB of headroom.
The pedal has a single TRS input that switches between mono and stereo operation, and two TS outputs. MIDI is available through the EXP/MIDI jack or USB-C, with MIDI Clock Sync for rotor speed and 300 MIDI preset locations. The EXP jack also accepts an expression pedal or switch accessories. It runs from an external 9V DC supply, which is not included.
Físeán
Sonraíochtaí
- Branda
- Strymon
- Samhail
- Lex V2
- Catagóir
- Éifeachtaí agus pedail
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input impedance
- 1M Ohm
- Input mode switch
- Mono (TS) / Stereo (TRS)
- Input level
- Instrument or line level (line adds 10dB headroom)
- Expression/MIDI input
- TRS jack for expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs (Out L, Out R)
- Output impedance
- 100 Ohm
Connectivity
- MIDI
- Via EXP/MIDI jack or USB-C
- USB
- USB-C for MIDI control and firmware updates
- MIDI presets
- 300 locations
- MIDI Clock Sync
- Rotor speed sync, saved per preset
Audio
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar
- Processing
- 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Bypass
- Relay true bypass (default) or buffered bypass
- Volume range
- +/-6dB boost/cut
Controls
- Footswitches
- Slow/Fast and On/Off
- Live Edit settings
- Bi-Amp mode, Cab Filter
Power
- Power requirement
- 9V DC, center negative, 300mA minimum
- Power supply
- Not included
Physical
- Chassis
- Anodized brown aluminum
- Dimensions
- 4.5" deep (11.43 cm) x 4" wide (10.16 cm) x 2.4" tall (6.1 cm)
- Origin
- Designed and built in the USA