El Capistan V2
Compact stereo tape-echo pedal with three tape machine types, spring reverb, a sound-on-sound looper and full MIDI control. Aimed at guitarists, and at keyboard, synth and bass players, who want vintage tape delay sounds without maintaining a tape machine.
- Three tape machine types, each with three modes
- Sound-on-sound looper: 20 s slow, 10 s fast
- 300 MIDI presets; MIDI via EXP/MIDI jack or USB-C
- Stereo outputs, TRS input with mono/stereo switch
- True (relay) or buffered bypass
- Needs 9V DC centre-negative, 300mA supply (not included)
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi El Capistan V2, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
El Capistan V2 is a digital pedal that models tape echo machines using dTape technology on an ARM DSP. A Tape Head switch selects fixed-head, multi-head or single sliding-head machines, and the Mode switch picks the playback heads or tape speed. Knobs cover time, repeats, mix, spring reverb, tape age and wow and flutter. Secondary functions adjust tape crinkle, bias, low end contour and a +/-3dB boost or cut.
The single-head machine includes a sound-on-sound looper with instant splice, bulk erase and two tape speeds, giving 20 seconds of tape at slow speed and 10 seconds at fast speed. A tap switch sets tempo, and holding it gives infinite repeats.
The pedal has a TRS stereo input with a rear mono/stereo switch, dual TS outputs and a line or instrument level setting. An EXP/MIDI jack and a USB-C port allow MIDI control, MIDI Clock Sync and firmware updates, with 300 preset locations. Bypass can be relay true bypass or buffered bypass. A power supply is not included.
Wideo
Specyfikacja
- Marka
- Strymon
- Model
- El Capistan V2
- Kategoria
- Efekty i kostki
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input impedance
- 1M Ohm
- Input level
- Instrument or line level (line adds 10dB headroom)
- Input mode switch
- Mono (TS) / Stereo (TRS)
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs (Out L, Out R)
- Output impedance
- 100 Ohm
Connectivity
- EXP/MIDI jack
- TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI connection
- USB
- USB-C for MIDI control and firmware updates
- MIDI presets
- 300 preset locations
- MIDI Clock Sync
- Supported, saved per preset
Controls
- Footswitches
- Dedicated tap tempo and on/off
- Tape head types
- Fixed, multi, single
- Bypass
- Relay true bypass (default) or buffered bypass
- Looper length
- 20 seconds at slow speed, 10 seconds at fast speed
Audio
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar, 32-bit floating point
- Frequency response
- 20Hz to 20kHz
Power
- Power requirement
- 9VDC, center negative, 300mA minimum
- Power supply
- Not included
Physical
- Dimensions
- 4.5" deep (11.43 cm) x 4" wide (10.16 cm) x 2.4" tall (6.1 cm)
- Chassis
- Anodized dark gray aluminum
- Origin
- Designed and built in the USA