EC-1
Strymon Descontinuado

EC-1

The EC-1 is a compact single-head tape echo pedal that models a 1960s tube Echoplex-style delay with a moving record head. It suits guitarists who want tape-style slapback and long repeats, in mono or stereo.

  • Single moving-head tape echo modelling with dTape technology
  • Delay time from 50 ms to 1 second, with tap tempo
  • Two tube preamp voices with up to +6 dB boost
  • Mono or stereo operation over TRS input and output
  • 300 presets; MIDI via EXP/MIDI jack or USB-C
  • Relay true bypass or buffered bypass
Vender um igual

Fotos

5

Anúncios

Ainda não há anúncios deste modelo

Quando alguém vender um EC-1, os anúncios e o histórico de vendas aparecem aqui.

Vender um igual

Descrição

The EC-1 is a digital tape echo pedal built on the maker's dTape modelling, which reproduces a sliding record head, tape condition, bias, motor behaviour and capstan slippage. Delay time runs from 50 ms to 1 second. Two modelled tube preamp voices are available, one based on an EP-2 and one on a modified EP-2 circuit, each with an optional boost of up to +6 dB or a bypass.

Controls cover Time, Mix, Repeats, Tape Age and Mechanics, plus a three-position Record Level switch (unity, +6 dB or +12 dB into the virtual record head) that sets how much saturation the repeats get. Tap tempo changes values without pitch shifting, clicks or mutes, and the Time knob sets the tap division (triplet, eighth, dotted eighth or quarter). The pedal stores 300 presets.

A single TRS input and TRS output handle mono or stereo, selected with a rear-panel switch (mono in/mono out, mono in/stereo out, stereo in/stereo out). Bypass can be true (relay-switched) or buffered. The EXP/MIDI jack accepts an expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI, and a USB-C port handles MIDI and firmware updates. It runs from a 9V DC adapter, which is sold separately.

Vídeo

Especificações

Marca
Strymon
Modelo
EC-1
Categoria
Efeitos e pedais

Inputs

Audio input
High impedance, ultra low-noise, discrete Class A JFET TRS stereo input
Audio input impedance
1M Ohm
Expression/MIDI input
TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI

Outputs

Audio output
Low impedance TRS stereo output
Audio output impedance
100 Ohm

Connectivity

USB
USB-C for MIDI and firmware updates
MIDI
Full MIDI implementation via EXP/MIDI jack or USB
I/O modes
Mono In → Mono Out, Mono In → Stereo Out, Stereo In → Stereo Out
Bypass modes
Relay true bypass (default) or buffered bypass

Audio

Delay time
50 ms to 1 second
Converters
24-bit 96kHz A/D and D/A
Processor
520MHz ARM Superscalar
Processing
32-bit floating point
Frequency response
20Hz to 20kHz
Signal to noise ratio
116dB (typical)
Record Level switch
Low: unity gain; Med: +6dB; High: +12dB
Presets
300

Power

Power requirements
9V DC, center-negative, 250mA minimum
Power connector
2.1mm
Power supply
Not included

Physical

Chassis
Anodized aluminum
Dimensions
4.6" D x 2.7" W x 2.2" H (11.7 x 6.9 x 5.6 cm)
Origin
Designed and built in the USA

Documentos

PDF Manual de utilizadorPDF · do fabricante

Dados: strymon.net; fotografias: Strymon product page · atualizado em 2026-10-14 · Encontraste um erro? Escreve-nos