EC-1
The EC-1 is a compact single-head tape echo pedal that models a 1960s tube Echoplex-style delay with a moving record head. It suits guitarists who want tape-style slapback and long repeats, in mono or stereo.
- Single moving-head tape echo modelling with dTape technology
- Delay time from 50 ms to 1 second, with tap tempo
- Two tube preamp voices with up to +6 dB boost
- Mono or stereo operation over TRS input and output
- 300 presets; MIDI via EXP/MIDI jack or USB-C
- Relay true bypass or buffered bypass
Billeder
5Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en EC-1, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The EC-1 is a digital tape echo pedal built on the maker's dTape modelling, which reproduces a sliding record head, tape condition, bias, motor behaviour and capstan slippage. Delay time runs from 50 ms to 1 second. Two modelled tube preamp voices are available, one based on an EP-2 and one on a modified EP-2 circuit, each with an optional boost of up to +6 dB or a bypass.
Controls cover Time, Mix, Repeats, Tape Age and Mechanics, plus a three-position Record Level switch (unity, +6 dB or +12 dB into the virtual record head) that sets how much saturation the repeats get. Tap tempo changes values without pitch shifting, clicks or mutes, and the Time knob sets the tap division (triplet, eighth, dotted eighth or quarter). The pedal stores 300 presets.
A single TRS input and TRS output handle mono or stereo, selected with a rear-panel switch (mono in/mono out, mono in/stereo out, stereo in/stereo out). Bypass can be true (relay-switched) or buffered. The EXP/MIDI jack accepts an expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI, and a USB-C port handles MIDI and firmware updates. It runs from a 9V DC adapter, which is sold separately.
Video
Specifikationer
- Mærke
- Strymon
- Model
- EC-1
- Kategori
- Effekter og pedaler
Inputs
- Audio input
- High impedance, ultra low-noise, discrete Class A JFET TRS stereo input
- Audio input impedance
- 1M Ohm
- Expression/MIDI input
- TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio output
- Low impedance TRS stereo output
- Audio output impedance
- 100 Ohm
Connectivity
- USB
- USB-C for MIDI and firmware updates
- MIDI
- Full MIDI implementation via EXP/MIDI jack or USB
- I/O modes
- Mono In → Mono Out, Mono In → Stereo Out, Stereo In → Stereo Out
- Bypass modes
- Relay true bypass (default) or buffered bypass
Audio
- Delay time
- 50 ms to 1 second
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar
- Processing
- 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Signal to noise ratio
- 116dB (typical)
- Record Level switch
- Low: unity gain; Med: +6dB; High: +12dB
- Presets
- 300
Power
- Power requirements
- 9V DC, center-negative, 250mA minimum
- Power connector
- 2.1mm
- Power supply
- Not included
Physical
- Chassis
- Anodized aluminum
- Dimensions
- 4.6" D x 2.7" W x 2.2" H (11.7 x 6.9 x 5.6 cm)
- Origin
- Designed and built in the USA