
Compadre
Analog guitar and bass pedal combining a VCA compressor with two voicings (Studio and Squeeze) and a separate clean or dirty boost with selectable EQ. Suited to players who want a compact front-end tone shaper that can also act as a volume pedal.
- Analog VCA compressor with Studio and Squeeze voicings
- Clean or dirty boost with treble, mid or flat EQ
- Boost and compressor switch independently
- Dry knob for parallel compression
- TRS expression input for VCA volume pedal
- MIDI control with up to 300 presets via MIDI EXP Cable
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ Compadre, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
Compadre pairs a VCA-based analog compressor with a post-compression boost, and the two sections can run together or independently via their own footswitches. The compressor offers a Studio voicing modelled on vintage rack units and a Squeeze voicing for harder, pedal-style compression. Auto threshold and auto makeup gain mean the Compression knob does most of the work, and a Dry knob blends uncompressed signal back in for parallel compression.
The boost can be set to clean or to a diode soft-clipped dirty mode, with three EQ shapes (treble, mid, flat). The input is a Class A JFET stage, and the signal path stays fully analog end to end. Frequency response extends down to 20Hz, so it works with bass as well as guitar. Bypass is selectable between true bypass (relay) and buffered bypass.
On the rear panel, a TRS expression pedal input turns the output VCA into a volume pedal. A Fav/MIDI jack accepts a MiniSwitch or MultiSwitch Plus for recalling favorite settings, or the MIDI EXP Cable for MIDI control with up to 300 presets. Power is a 9V DC center-negative supply, which is not included.
Vidjo
Speċifikazzjonijiet
- Marka
- Strymon
- Mudell
- Compadre
- Kategorija
- Effetti u pedali
Controls
- Knobs
- Boost, Compression, Dry, Level
- Boost EQ
- Treble, Mid, Flat
- Comp Type
- Studio, Squeeze
- Boost Type
- Clean, Dirty
- Footswitches
- Boost, Comp
- Level range
- -6dB to +6dB (unity at noon)
Inputs
- Input
- High impedance, ultra low-noise discrete Class A JFET preamp input
- Volume jack
- TRS expression pedal input
- Fav / MIDI jack
- TRS, for MiniSwitch, MultiSwitch Plus or MIDI EXP Cable
Outputs
- Output
- Low impedance mono output
Audio
- Signal path
- Fully analog, never converted to digital
- Compressor signal/noise
- 109 dB typical
- Frequency response
- Down to 20Hz
- Typical boost
- Approx. 14dB (flat clean setting)
- Bypass
- Selectable true bypass (relay) or buffered bypass
Connectivity
- MIDI
- Via quarter-inch TRS; requires MIDI EXP Cable or MIDI > TRS interface
- Presets via MIDI
- Up to 300
- Favorites
- 1 with MiniSwitch, 3 with MultiSwitch Plus
Power
- Power requirement
- Max 9V DC center-negative, min 150mA
- Connector
- 5.5mm x 2.1mm barrel
- Power supply
- Not included
Physical
- Dimensions (D x W x H)
- 4.5" x 4" x 2.4" (11.43 x 10.16 x 6.1 cm)
- Chassis
- Anodized dark red aluminum
- Origin
- Designed and built in the USA