blueSky V2
Second-generation compact reverb pedal with plate, room and spring types, a dedicated Shimmer knob and a Mod switch. It suits guitarists, keyboard players and studio users who want stereo reverb with MIDI control and preset storage.
- Plate, room and spring reverb types
- Dedicated Shimmer knob with per-type pitch behaviour
- Mono/stereo input switch, dual TS outputs
- 300 MIDI presets via EXP/MIDI jack or USB-C
- True bypass (relay) or buffered bypass
- 24-bit/96kHz converters, 20Hz–20kHz response
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao blueSky V2, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The pedal offers three reverb types: a vintage-style plate, a room that ranges from small spaces to arenas, and a spring recreation. Controls cover Mix, Decay, Pre-Delay, Low and High damping, and a Shimmer knob whose pitch behaviour depends on the reverb type: octave up on plate, octave plus a fifth on room, octave down with adjustable LFO speed on spring. A Mod switch selects light, deep or no modulation.
The input is a high-impedance Class A JFET stage with a rear switch for mono or stereo (TRS) sources, and there are two TS outputs for stereo use. Line-level mode adds 10dB of headroom for bass with active pickups, synths, effects loops and vocals. Bypass is relay-switched true bypass by default, with a buffered bypass option. Processing runs at 24-bit/96kHz on a 520MHz ARM processor.
The EXP/MIDI jack accepts an expression pedal, MiniSwitch, MultiSwitch Plus or MIDI, and the USB-C port handles MIDI and firmware updates. 300 MIDI preset locations are available, plus a footswitch-recalled Favorite preset. A power supply is not included.
Videozapis
Specifikacije
- Marka
- Strymon
- Model
- blueSky V2
- Kategorija
- Efekti i pedale
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input impedance
- 1M Ohm
- Input mode switch
- Mono (TS) or Stereo (TRS)
- Line level mode
- 10dB added headroom
- Expression/MIDI input
- TRS jack for expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs (Out L, Out R)
- Output impedance
- 100 Ohm
Connectivity
- USB
- USB-C for MIDI control and firmware updates
- MIDI presets
- 300 preset locations
- Footswitches
- Dedicated Favorite and On/Off
Audio
- Reverb types
- Plate, room, spring
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar
- Processing
- 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Bypass
- Relay true bypass (default) or buffered bypass
Power
- Power requirement
- 9V DC, center negative, 300mA minimum
- Power supply
- Not included
Physical
- Dimensions
- 4.5" deep (11.43 cm) x 4" wide (10.16 cm) x 2.4" tall (6.1 cm)
- Chassis
- Anodized blue aluminum
- Origin
- Designed and built in the USA