AA.1
AA.1 is a 4HP Eurorack module that raises guitar-level signals by 18 dB for modular inputs and lowers Eurorack-level signals by 18 dB for pedals, interfaces or other guitar-level gear. It suits players who combine guitar pedals or instruments with a modular system.
- 4HP Eurorack amplifier and attenuator module
- Amplifies guitar-level input by +18 dB
- Attenuates Eurorack-level signals by -18 dB
- Stereo 1/4" input; 1/8" left and right Eurorack ports
- Draws 10mA from +12V and 10mA from -12V
- Rack depth 1.5" (38 mm)
Zdjęcia
5Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi AA.1, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
AA.1 works as a level-matching bridge between guitar gear and Eurorack. A stereo 1/4" input is amplified by +18 dB and sent to left and right 1/8" outputs, with the left output used for mono sources. In the other direction, left and right 1/8" inputs are attenuated by 18 dB and sent to left and right 1/4" outputs suited to guitar-level equipment.
Typical uses include patching a pedal into the effects send and return of a Magneto module, feeding a guitar or bass into a modular system for processing, or sending an instrument-level stereo master from the rack to a computer audio interface. This addresses the mismatch where Eurorack modules put out hot signals that can overload pedal or interface inputs, while modular audio inputs expect hot signals.
The module takes power from the Eurorack bus, drawing 10 mA from each of the +12V and -12V rails and nothing from +5V. It occupies 4 HP and needs 1.5 inches (38 mm) of rack depth. It is designed and built in the USA.
Wideo
Specyfikacja
- Marka
- Strymon
- Model
- AA.1
- Kategoria
- Syntezatory i klawisze › Modularne (Eurorack)
Inputs
- Amplifier input
- 1/4" stereo (STEREO IN), tip to L OUT, ring to R OUT
- Attenuator inputs
- L and R 1/8" IN
- Amplifier input impedance
- 1 MΩ
- Attenuator input impedance
- 8 kΩ
Outputs
- Amplifier outputs
- L and R OUT +18 dB (1/8"), use L OUT for mono
- Attenuator outputs
- L and R OUT -18 dB (1/4")
- Amplifier output impedance
- 1 kΩ
- Attenuator output impedance
- 880 Ω
Audio
- Amplifier gain
- +18 dB
- Amplifier max input level (before soft clipping)
- 2.25 Vpp
- Amplifier max output
- 18 Vpp
- Attenuator gain
- -18 dB
- Attenuator max input level (nominal)
- 20 Vpp
- Attenuator max output level (nominal)
- 2.5 Vpp
- Frequency response
- 20 Hz – 20 kHz, +/- 1 dB
Power
- +12V rail
- 10 mA max
- -12V rail
- 10 mA max
- +5V rail
- 0 mA
Physical
- Format
- 4 HP Eurorack module
- Rack depth
- 1.5" (38 mm)
- Origin
- Designed & Built in the USA