TE2 Tempest Engine
The TE2 is a 2RU hardware processing engine for SSL System T broadcast consoles, offering up to 800 processing paths and up to 2048 inputs and outputs. It suits large broadcast, OB and entertainment productions that need scalable DSP with optional redundancy.
- Up to 800 processing paths
- 800 Dyn, 800 EQ and 400 Delay processors
- Up to 2048 simultaneous inputs and outputs
- 2RU chassis, supports all five processing packs
- Up to 4 high-capacity Dante HC or ST 2110 I/O cards
- Mirrored redundant pair option with instant changeover
Billeder
8Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en TE2 Tempest Engine, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The TE2 Tempest Engine is the higher-capacity of the two hardware engines in the System T range. It runs SSL's Optimal Core Processing software on arrayed industrial PC hardware in a lightweight, efficiently cooled 2RU chassis. It supports all five processing packs, which are licensed as perpetual or time-based rental options, and paths and processing can be reallocated in real time without interrupting audio.
The engine provides a pool of up to 800 paths, with 800 dynamics, 800 EQ and 400 delay processors, and up to 2048 simultaneous inputs and outputs. Two engines can be run as a mirrored redundant pair with instant audio changeover, and each can sit in a separate physical zone.
Connectivity is built around audio-over-IP. The engine accepts up to four high-capacity I/O cards, either Dante HC cards (with AES67 capability) or ST 2110 cards with NMOS IS-04 and IS-05 support, so it can work in Dante, ST 2110 or hybrid networks without external bridging. It works with all System T surface and control variants.
Specifikationer
- Mærke
- SSL
- Model
- TE2 Tempest Engine
- Kategori
- Live-lyd › Andet live-udstyr
Processing
- Path capacity
- 800
- Path pool
- Up to 800
- Dynamics processing
- 800 Dyn
- EQ processing
- 800 EQ
- Delay processing
- 400 Delay
- Processing packs supported
- All five (TE1 supports Pack 1 & 2)
- Core technology
- Optimal Core Processing (OCP)
Inputs
- Simultaneous inputs
- Up to 2048
- I/O card slots
- Up to 4 high capacity I/O cards
Outputs
- Simultaneous outputs
- Up to 2048
Connectivity
- Native networks
- Dante and ST 2110
- Routing
- AoIP routing for unlimited total IO capacity
- Redundancy
- Mirrored redundant pairs with instant audio changeover
Dante HC Card
- Media ports
- 2x 1G SFP (RJ45, single-mode fibre, multi-mode fibre)
- Channels at 48 kHz
- 512 Tx and 512 Rx per card
- Channels at 96 kHz
- 256 Tx and 256 Rx per card
- Streams
- 128 Tx and 128 Rx at all sample rates
ST 2110 Card
- Media ports
- 2x 1G SFP (RJ45, single-mode fibre, multi-mode fibre)
- Config port
- 1x 1G RJ45
- Channels
- 256 Tx and 256 Rx per card
- Streams
- 32 Tx and 32 Rx per card
- Supported standards
- ST 2110-30 Level A, B and C; ST 2022-7; NMOS IS-04 and IS-05; SSM
Physical
- Chassis
- 2RU