SPL Track One Mk3
SPL Wycofany

SPL Track One Mk3

Two-channel-input analog channel strip with a mic preamp, a separate instrument/line input, de-esser, auto-timed compressor/limiter and a four-band equalizer. Suited to vocal, podcast, broadcast and instrument recording, or as an analog insert processor for line-level sources.

  • Mic preamp up to 63 dB gain with 48 V phantom power
  • Separate instrument input (0 to +35 dB) and line input (-12 to +22 dB)
  • Auto-threshold de-esser, auto-timed compressor/limiter, 3-band EQ
  • Compressor link for stereo pairing of two units
  • 19-inch, 44 mm high, 3.4 kg; optional input transformer (Premium)
Sprzedaj taki sam

Zdjęcia

6

Ogłoszenia

Brak jeszcze ogłoszeń tego modelu

Gdy ktoś wystawi SPL Track One Mk3, ogłoszenia i historia sprzedaży pojawią się tutaj.

Sprzedaj taki sam

Opis

Track One Mk3 is a half-rack-width-free 19-inch, one-unit channel strip that combines a microphone preamp with 48 V phantom power and a separate unbalanced instrument/line preamp. Mic gain reaches up to 63 dB, line gain runs from -12 dB to +22 dB and instrument gain from 0 dB to +35 dB. A 6 dB/octave highpass filter acts below 80 Hz.

The processing chain has an auto-threshold de-esser that is set with a single S-Reduction control, a compressor with automatic attack and release times and a 0 to -20 dB threshold, a make-up gain stage of up to 20 dB, and a soft-limiter mode. The equalizer has a semi-parametric low-mid band (30 Hz to 700 Hz, up to +/-14 dB), a mid-high band (680 Hz to 15 kHz, up to +/-12 dB) and a 19 kHz coil-capacitor Air band (+/-10 dB). Both bands use proportional-Q behavior.

The display shows S-detection, clip and signal LEDs, a PPM output meter and a gain reduction indicator. Connections are Neutrik XLR sockets, with a compressor link for stereo operation of two units. Line-level sources can be routed through it as an analog insert. A Premium version adds an optional mic input transformer.

Specyfikacja

Marka
SPL
Model
Track One Mk3
Kategoria
Studio › Przedwzmacniacze i outboard

Inputs

Analog inputs and output
XLR & TRS Jack (all balanced, except INSTR./LINE IN: unbalanced)
Maximum input gain (Mic)
10.6 dBu
Maximum input gain (Line)
33.5 dBu
Maximum input gain (Instrument)
21.5 dBu
Input impedance (Mic)
10 kΩ
Input impedance (Line)
47 kΩ
Input impedance (Instrument)
1.1 MΩ
Phantom power
48 V

Outputs

Maximum output gain
20 dBu
Output impedance
75 Ω
Output control range
-20 dB to +5.5 dB

Audio

Frequency range (Mic)
10 Hz – 195 kHz
Equivalent Input Noise (EIN)
-126.8 dBu
Noise (A-weighted, Mic Preamp, 150 Ω, 30 dB Gain)
-94.5 dBu
Noise (A-weighted, Line/Instr Preamp, 0 dB Gain)
-97 dBu
Common mode rejection (1 kHz)
80 dB
Dynamic range
130.5 dB
Highpass filter
6 dB/octave, below 80 Hz

Power

Mains voltage (selectable)
230 V AC / 50 Hz; 115 V AC / 60 Hz
Power consumption
max. 15 W
Fuse for 230 V
T 200 mA
Fuse for 115 V
T 400 mA

Physical

Dimensions (W x H x D)
482 x 44 x 210 mm (19 x 1.73 x 8.27 inch)
Unit weight
3.4 kg (7.49 lbs)
Shipping weight (incl. packaging)
4.5 kg (9.92 lbs)

Dokumenty

PDF Instrukcja obsługiPDF · od producenta

Dane: spl.audio; zdjęcia: SPL product page · zaktualizowano 2026-10-18 · Widzisz błąd? Napisz do nas