
MKH 8040
The MKH 8040 is a cardioid RF condenser microphone from Sennheiser's MKH 8000 modular series. Its pattern reduces pick-up of reverberant rooms and rear noise, so it suits spot miking, surround recording and rooms with poor acoustics.
- Cardioid RF condenser microphone
- Frequency response 30 to 50,000 Hz
- Equivalent noise level 13 dB
- Symmetrical transducer with 2 backplates
- Balanced XLR-3M output, 48 V phantom power
- Modular head and XLR module; stereo pairs available
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao MKH 8040, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The MKH 8040 is a small-diaphragm cardioid microphone built on an RF condenser principle. Its directional pattern limits how much room reverberation and rear-arriving noise it picks up, which helps in spaces with poor acoustics. It has a frequency response of 30 to 50,000 Hz and an equivalent noise level of 13 dB.
The transducer is symmetrical, with two backplates, which is intended to keep distortion very low. The capsule has a non-reflective Nextel coating. The design is modular: the microphone head sits on a separate XLR module, and the system can be used as a spot microphone or for surround recording. Matched stereo pairs are also offered.
Connection is through a balanced, transformerless, floating XLR-3M output, and the microphone runs on 48 V phantom power. The set includes the MKHC 8040 head, an MZX 8000 XLR module, an MZQ 8000 clip, an MZW 8000 windshield, a user manual and a transport case.
Videozapis
Specifikacije
- Marka
- Sennheiser
- Model
- MKH 8040
- Kategorija
- Studio › Mikrofoni
Audio
- Polar pattern
- Cardioid
- Transducer principle
- RF condenser microphone
- Frequency response
- 30 - 50000 Hz
- Audio frequency response
- 30 to 50000 Hz
- Equivalent noise level
- 13 dB
Outputs
- Audio output
- XLR-3M balanced, transformerless, floating
Power
- Phantom powering
- 48 V +/- 4 V
Electrical
- Nominal impedance
- 25 Ω
- Min. terminating impedance
- 1000 Ω
Physical
- Dimensions
- Ø 19 mm, L 41 mm (74 mm with XLR module)
- Weight
- 25 g (55 g with XLR module)
- Packaging height
- 82 mm
- Packaging length
- 245 mm
- Packaging width
- 170 mm
- Article No.
- 506289
In the box
- Microphone head
- MKHC 8040
- XLR module
- MZX 8000
- Microphone clip
- MZQ 8000
- Windshield
- MZW 8000
- Documentation
- User manual
- Case
- Transport case