EW-DX MKE 2 Set
Sennheiser Descontinuado

EW-DX MKE 2 Set

Two-channel digital UHF wireless lavalier set with a half-rack receiver, two bodypack transmitters, two omnidirectional MKE 2 clip-on microphones and rechargeable batteries. Aimed at presenters, classrooms, corporate venues and live productions that need a network-ready wireless system.

  • 2-channel digital UHF set, Q1-9 range (470.2-550 MHz)
  • Includes 2 bodypacks, 2 MKE 2 omni lavaliers and 2 BA 70 batteries
  • 134 dB input dynamic range, 1.9 ms latency (SePAC codec)
  • Up to 12 hours battery operation, in-device charging
  • AES 256 encryption; up to 88 MHz switching bandwidth
  • Network control and Smart Assist App over BLE
Vender um igual

Fotos

8

Anúncios

Ainda não há anúncios deste modelo

Quando alguém vender um EW-DX MKE 2 Set, os anúncios e o histórico de vendas aparecem aqui.

Vender um igual

Descrição

The set pairs an EW-DX EM 2 two-channel rack receiver with two EW-DX SK bodypack transmitters, each fitted with an MKE 2 omnidirectional clip-on lavalier. Two BA 70 lithium-ion battery packs are included and give up to 12 hours of operation. The transmitters have charging contacts for in-device charging with the separately sold CHG 70N charger.

The system uses the SePAC codec, which gives 134 dB of input dynamic range, so transmitter gain does not need to be set, and 1.9 ms of wireless latency. An AutoScan function checks the RF environment and assigns frequencies with equidistant spacing: 600 kHz spacing for up to 146 channels in Standard Mode, or 300 kHz spacing for up to 293 channels in Link Density mode. Switching bandwidth is up to 88 MHz, and transmission can be secured with AES 256 encryption. This version covers the Q1-9 range of 470.2-550 MHz.

The receiver is network enabled and can be controlled with Sennheiser Control Cockpit, Wireless Systems Manager, or third-party control systems through plug-ins. The Smart Assist App connects over Bluetooth Low Energy at distances up to 25 metres. The bodypacks have an E-Ink display that keeps showing settings when the batteries are removed, and they accept other Sennheiser lavalier and headset microphones with a 3.5 mm jack.

Especificações

Marca
Sennheiser
Modelo
EW-DX MKE 2 Set
Categoria
Som ao vivo › Sistemas sem fios

Microphone

Polar pattern
Omnidirectional
Transducer principle
pre-polarized condensor microphone
Sensitivity
5 mV/Pa +- 3 dB
Max. sound pressure level
142 dB
Equivalent noise level
26 dB

Audio

Audio frequency response
20 Hz - 20 kHz (-3 dB), 20 to 20,000 Hz
Dynamic range
134 dB
Total harmonic distortion (THD)
≤ -60 dB for 1 kHz @ -3 dBfs input level
Audio output level
18 dBu max.
Wireless latency
1.9 ms

Wireless

Frequency range
Q1-9 (470.2-550 MHz)
Switching bandwidth
Up to 88 MHz
Channels, Standard Mode
Up to 146 (600 kHz spacing)
Channels, Link Density Mode
Up to 293 (300 kHz spacing)
Encryption
AES 256

Connectivity

Bluetooth transmission frequency
2402 - 2480 MHz
Bluetooth transmission power
BLE: max. 10 mW EIRP
Microphone connection
3.5 mm jack plug

Power

Input voltage
11 - 13 V ⎓ or PoE IEEE 802.3af Class 0 (CAT5e or higher)
Charging current
≤ 1 A
Battery operation time
Up to 12 hours (BA 70)

Physical

Dimensions
212 x 44 x 189 mm
Weight
approx. 1000 g (2.2 lbs) (without antennas and power supply)
Cable length
approx. 1.60 m (62.99")
Operating temperature
-10 °C - +55 °C (14 °F - 131 °F)
Operating relative humidity
5 - 95 % (non-condensing)

In the box

Receiver
1 x EW-DX EM 2 rack receiver
Transmitters
2 x EW-DX SK bodypack transmitter
Microphones
2 x EW-DX MKE 2 lavalier microphone (omni-directional)
Batteries
2 x BA 70 rechargeable battery pack
Other contents
EW-D power supply with country adapters, 2 rod antennas, GA 3 rack mount kit, 4 rubber feet

Documentos

PDF Manual de utilizadorPDF · do fabricante

Dados: archive.org, sennheiser.com; fotografias: Sennheiser product page (Wayback copy) · atualizado em 2026-10-14 · Encontraste um erro? Escreve-nos