sE8 Omni
sE Electronics Wycofany

sE8 Omni

The sE8 omni is a small-diaphragm true condensor microphone with an omnidirectional pattern, aimed at acoustic instruments, orchestral and choir recording, drum overheads and room miking. It has switchable pads and low-cut filters and an all-metal body.

  • Omnidirectional 1/2" true condenser, handmade capsule
  • Switchable -10 / -20 dB pad
  • Switchable 80 / 160 Hz low-cut filter
  • 20 Hz – 20 kHz, 15 dB equivalent noise level
  • Max SPL up to 161 dB with 20 dB pad
  • All-metal body, gold-plated XLR, 48 V phantom power
Sprzedaj taki sam

Zdjęcia

8

Ogłoszenia

Brak jeszcze ogłoszeń tego modelu

Gdy ktoś wystawi sE8 Omni, ogłoszenia i historia sprzedaży pojawią się tutaj.

Sprzedaj taki sam

Opis

The sE8 omni is a pencil-style condenser microphone with a handmade 1/2" true condenser capsule that uses an ultra-thin gold-sputtered diaphragm. The capsule is tuned individually at the maker's own factory. The circuit is Class A, transformerless and built without integrated circuits.

Two switches shape the signal. A -10 dB / -20 dB pad gives headroom for loud sources such as brass, timpani and drums. A low-cut filter at 80 Hz or 160 Hz reduces low-frequency noise and footfall rumble and can offset proximity effect in close miking. The body is all metal with a gold-plated 3-pin XLR connector.

The mic connects over balanced XLR and runs on 48 V phantom power. The capsule is interchangeable with the sE8 cardioide capsule. Factory-matched pairs are hand-selected and measured in an anechoic chamber, and the pair version is supplied with a stereo bar, windscreens, clips and a metal case.

Wideo

Specyfikacja

Marka
sE Electronics
Model
sE8 Omni
Kategoria
Studio › Mikrofony

Audio

Capsule
Handmade 1/2" true condenser
Polar pattern
Omnidirectional
Frequency range
20 Hz - 20 kHz
Sensitivity
20 mV / Pa (-34 dBV)
Max SPL
141 / 151 / 161 dB (pad 0 / 10 / 20 dB)
Equivalent noise level
15 dB
Dynamic range
126 / 136 / 146 dB (pad 0 / 10 / 20 dB)
Signal-to-noise ratio
79 dB
Low-cut filter
80 / 160 Hz, 6 dB / Oct, switchable
Pad
10 / 20 dB, switchable

Connectivity

Connector
3-pin male XLR

Power

Phantom power
48 V (P48 per IEC 61938)
Electrical impedance
110 ohms
Recommended load impedance
>1k ohms

Physical

Microphone diameter
23 mm (0.91 in)
Microphone length
120 mm (4.72 in)
Microphone weight
141 g (4.97 oz)
Capsule length
22 mm (0.87 in)
Capsule weight
26 g (0.92 oz)

In the box

Microphone
sE8 omni microphone
Mic clip
With thread adapter
Windscreen
Included

Dokumenty

PDF Instrukcja obsługiPDF · od producenta

Dane: seelectronics.com; zdjęcia: sE Electronics product page · zaktualizowano 2026-10-11 · Widzisz błąd? Napisz do nas