sE4400
The sE4400 is a large-diaphragm true condenser microphone with four switchable polar patterns, a metal die-cast body and a custom shockmount. It suits studio and live users who want one mic for vocals, drums, guitar cabs, piano and strings.
- 1-inch hand-made true condenser capsule, gold Mylar diaphragm
- 4 switchable patterns: cardioid, omni, figure-8, hypercardioid
- Pads of 10 / 20 dB and low-cut filters at 40 / 80 Hz
- Die-cast metal body with metal switches and steel mesh grille
- Custom shockmount for close-miking; matched pair available
- 48 V phantom power, 3-pin XLR output
Bilder
8Annonser
Ingen annonser for denne modellen ennå
Når noen selger en sE4400, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The sE4400 is a multipattern condenser microphone built around a 1-inch dual-diaphragm capsule that is hand-made and individually tuned at the maker's own factory. The diaphragm is gold-sputtered Mylar. Four polar patterns can be selected: cardioide, omnidirectional, figure-8 and hypercardioid. The body is die-cast metal with metal switches and a steel spring-mesh grille, with no LED and no plastic switches.
Two switchable pre-attenuation pads (10 and 20 dB) extend the dynamic range for loud sources, and two switchable low-cut filters (40 and 80 Hz) help control low-frequency noise and proximity effect. The flat, rounded chassis sits centred in a custom shockmount, so the mic can be placed close to a drum head or against a guitar cabinet, and the mount isolates it from bass rumble and footstep noise.
The mic connects through a 3-pin male XLR and needs 48 V phantom power. It is also sold as a matched stereo pair, in which each microphone is tested, tuned and matched for near-identical frequency response, supplied with a stereo bar, two shockmounts and a metal case.
Video
Spesifikasjoner
- Merke
- sE Electronics
- Modell
- sE4400
- Kategori
- Studio › Mikrofoner
Capsule
- Capsule
- 1" true condenser, hand-made, gold-sputtered
- Diaphragm
- Gold Mylar
- Polar patterns
- Cardioid, Hypercardioid, Omnidirectional, Figure-8
Audio
- Frequency range
- 20 Hz - 20 kHz
- Sensitivity
- 25 mV / Pa (-32 dBV)
- Max SPL
- 137 / 147 / 157 dB (0 / 10 / 20 dB pad - 0.5% THD)
- Equivalent noise level
- 13 dB(A)
- Signal-to-noise ratio
- 81 dB
- Low-cut filter
- 40 / 80 Hz, 6 dB/Oct, switchable
- Attenuation pad
- 10 / 20 dB, switchable
Outputs
- Electrical impedance
- 22 ohms
- Connector
- 3-pin male XLR
Power
- Power supply
- 48 V phantom power (P48 per IEC 61938)
Physical
- Weight
- 290 g (10.23 oz)
- Length
- 146 mm (5.75 in)
- Width
- 58 mm (2.32 in)
- Diameter
- 29 mm (1.10 in)
In the box
- Single mic
- sE4400 microphone, custom shockmount with thread adapter, metal case
- Matched Pair
- 2 x sE4400, 2 x shockmount with thread adapter, stereo mounting bar, metal case