DynaCaster
sE Electronics Descontinuado

DynaCaster

Front-addressed cardioid dynamic microphone with a built-in pop filter, shockmount and stand mount, plus a switchable +30 dB active preamp. Aimed at podcasters, streamers, broadcasters and vocal or instrument recording.

  • Front-addressed cardioid dynamic with aluminum voice coil
  • Switchable preamp adds 30 dB gain (needs 48 V phantom)
  • Two recessed EQ switches give six configurations
  • Built-in 3-layer pop filter and shockmount
  • All-metal body with gold-plated 3-pin XLR
  • Frequency range 20 Hz - 19 kHz
Vender um igual

Fotos

7

Anúncios

Ainda não há anúncios deste modelo

Quando alguém vender um DynaCaster, os anúncios e o histórico de vendas aparecem aqui.

Vender um igual

Descrição

The DynaCaster DCM8 is an all-metal dynamic microphone with an aluminum voice coil and neodymium magnet, using capsule technology derived from the maker's V Series dynamics. It has a cardioid pattern and is addressed from the front, which helps reject room noise around a close source.

A switchable preamp adds 30 dB of gain when engaged and 48 V phantom power is supplied. With the switch off, the microphone works passively and needs no external power. Two recessed switches give up to six EQ configurations, covering low-end and high-end shaping, such as trimming boominess or sibilance, and the recessed placement protects settings from accidental changes.

A three-layer pop filter and a shockmount are built into the body, so no external accessories are needed. The integrated stand mount swivels widely and fits a range of boom arms. Connection is by a gold-plated 3-pin male XLR. The package includes an external windscreen, a thread adapter, a sticker and a manual with warranty card.

Vídeo

Especificações

Marca
sE Electronics
Modelo
DynaCaster
Categoria
Estúdio › Microfones

Audio

Capsule
Dynamic
Voice coil
Aluminum
Magnet
Neodymium
Directional pattern
Cardioid
Frequency range
20 Hz - 19 kHz
Sensitivity
2.0 / 60 mV/Pa (-54 / -24 dBV)
Preamp gain (switchable)
+30 dB
EQ configurations
Up to 6 (two recessed switches)

Power

Powering
48V Phantom Power (P48 according to IEC 61938)
Current
3.0 mA
Electrical impedance
300 / 135 Ohms
Recommended load impedance
> 1k Ohms

Connectivity

Connector
3-pin male XLR (gold-plated)

Physical

Diameter x length
Ø 62 x 220 mm (ø 2.44 x 8.66 in.)
Weight
850 g (29.98 oz.)
Housing
All-metal, matte black finish
Pop filter
Integrated 3-layer
Shockmount
Integrated

In the box

Microphone
DynaCaster
Windscreen
External windscreen
Adapter
Thread adapter
Extras
sE logo sticker
Documentation
User manual with warranty card

Dados: seelectronics.com; fotografias: sE Electronics product page · atualizado em 2026-10-11 · Encontraste um erro? Escreve-nos