DJ-505
Two-channel, four-deck Serato DJ Pro controller with built-in TR-909, TR-808, TR-707 and TR-606 drum sounds and a 16-step sequencer. It suits DJs who want to remix and produce live, and it can also work as a standalone mixer with turntables or players.
- Two channels, up to four decks via Deck Select
- TR-909, TR-808, TR-707, TR-606 sounds with ACB technology
- 16-step sequencer for TR sounds or Serato Sampler
- Balanced XLR master outs and balanced Booth outs
- Standalone mixer use; Serato DVS upgrade ready
- MIDI output syncs external devices to the sequencer
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur DJ-505 birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The DJ-505 is a compact controller for Serato DJ Pro with two channels and a Deck Select function that gives access to four decks. Large, low-latency platters with brushed aluminum top plates and illuminated outer rings are intended for scratching. Eight performance pads cover Hot Cue, Roll, Slicer, TR, Pattern and Sampler modes.
A built-in drum section models the TR-909, TR-808, TR-707 and TR-606 using ACB (Analog Circuit Behavior) technology. Each kit has eight sounds, which can be played on the pads or triggered from a 16-step sequencer. The sequencer can also drive the Serato Sampler. Level, Attack, Decay and Tune knobs shape the drum sounds and samples in real time. A Serato Tool Kit license is included.
The unit has a built-in 24-bit/48 kHz audio interface and connects to a computer over USB. Balanced XLR master outputs, balanced Booth outputs, and 1/4-inch and 1/8-inch headphone jacks cover PA and monitoring. Line and phono inputs let the mixer run standalone, and a MIDI output syncs external gear to the TR-S sequencer.
Myndband
Tækniupplýsingar
- Framleiðandi
- Roland
- Líkan
- DJ-505
- Flokkur
- DJ-búnaður › DJ-stýringar
Inputs
- Line/phono inputs (RCA)
- INPUT 1–4 (LINE), INPUT 1–2 (PHONO)
- Nominal input level, LINE
- -12 dBu
- Nominal input level, PHONO
- -39 dBu
- Nominal input level, MIC IN
- -60 dBu
- Mic input connector
- 1/4-inch phone type
- Input impedance, RCA
- 47 k ohms or greater
- Input impedance, MIC IN
- 7 k ohms or greater
Outputs
- Master Out 1
- XLR type (balanced), +6 dBu, 600 ohms
- Master Out 2
- RCA phono type, +0 dBu, 1 k ohm (unbalanced)
- Booth Out
- TRS phone type (balanced), +6 dBu, 600 ohms
- Phones jacks
- Stereo 1/4 inch phone type, miniature phone type
- Phones output impedance
- 44 ohms
Audio
- Sampling frequency
- 48 kHz
- Audio interface
- 24-bit/48 kHz
- Frequency response
- 20 Hz–22 kHz (+0/-2 dB)
Connectivity
- PC port
- USB type B
- MIDI
- MIDI OUT connector
- Phono ground
- PHONO GROUND terminal
Power
- Power supply
- AC adaptor
- Current draw
- 2,000 mA
Physical
- Width
- 530 mm (20-7/8 inches)
- Depth
- 402 mm (15-7/8 inches)
- Height
- 73 mm (2-7/8 inches)
- Weight
- 3.5 kg (7 lbs 12 oz)
Software
- DJ software
- Serato DJ Pro
- Included license
- Serato Tool Kit (Pitch 'n Time DJ, Flip, all Serato DJ FX packs)
In the box
- Accessories
- Startup Guide, safety leaflet, AC adaptor, power cord, USB cable, Serato Tool Kit voucher