RP-8000
Discontinued hybrid direct-drive turntable with a built-in MIDI control section (Trax encoder, 8 drum pads, four performance modes) for DJs using Serato DJ, Traktor, Virtual DJ or Scratch Live. It has an adjustable-torque quartz motor and a +/-50% pitch range.
- Quartz-driven upper-torque direct drive with brushless DC motor
- Built-in MIDI section: Trax encoder, 8 pads, 4 performance modes
- Pitch +/-8%, +/-16%, +/-50% at 0.02% resolution
- Line/phono switch, no grounding required
- Turntable-link USB for up to 4 decks on one computer connection
- Official Serato DJ accessory; Traktor and Scratch Live mappings
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ RP-8000, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The RP-8000 is a quartz-driven, upper-torque direct-drive turntable that adds a MIDI control section to the deck itself. The section has a Trax encoder for browsing and loading tracks, eight backlit multi-function pads, and four combinable performance modes: cue, loop, sample and slicer. A dual-performance option splits the pads between two modes at once. It works with MIDI-compatible DJ software without a separate controller. It is officially supported in Serato DJ, and mappings are available for Traktor and Serato Scratch Live.
The deck offers pitch ranges of +/-8%, +/-16% and +/-50% at 0.02% resolution, with an LCD that shows pitch, BPM, deck assignment and firmware settings. Torque is adjustable from a classic to a high-torque setting, start/brake time runs from 0.2 to 6 seconds, and there are a reverse switch and two start/stop buttons. A line/phono switch allows direct connection to line inputs without grounding.
The deck connects to a computer by USB. Up to four turntables can be linked over USB, so only one needs a direct computer connection and the others assign themselves to the next deck in turn. Mains and RCA cables are removable. The unit ships without a stylus or headshell.
Vidjo
Speċifikazzjonijiet
- Marka
- Reloop
- Mudell
- RP-8000
- Kategorija
- Tagħmir tad-DJ › Turntables tad-DJ
Turntable
- Type
- Manual quartz direct drive turntable with MIDI control
- Drive
- Quartz driven upper-torque direct drive
- Motor
- Brushless DC motor
- Speeds
- 33 1/3, 45 and 78 RPM (3 speeds, fully manual)
- Platter
- Aluminum die casting
- Pitch range
- +/-8%, +/-16%, +/-50%
- Pitch resolution
- 0.02%
- Torque
- Adjustable, min. 1600 - 4500 g/cm
- Start-up time / tempo change
- Less than 0.2 sec.
- Brake system
- Electronic brake
- Start/stop time
- Adjustable, 0.2 - 6 sec.
Tonearm and Cartridge
- Admissible cartridge weight
- 3.5 - 8.5 g (incl. headshell 13 - 18 g)
- Anti-skating range
- 0 - 3 g
Audio
- Wow and flutter
- 0.01% WRMS
- S/N ratio
- More than -55 dB (1 kHz, 4 mV input)
- Output
- Phono and line (switchable), no grounding necessary
Controls
- MIDI control section
- Trax encoder, 8 backlit drum pads
- Performance modes
- 4 combinable: cue, loop, sample, slicer
- Start/stop buttons
- 2
- Display
- LCD for pitch, BPM value, deck assignment and firmware settings
Connectivity
- USB
- Turntable-link USB port, link up to 4 turntables
- Cables
- Removable mains and RCA cables
Power
- Power input
- 14 W
- Power supply
- AC 115/230 V, 60/50 Hz (EU/US); AC 100 V, 50/60 Hz (JP)
Physical
- Dimensions
- 458 x 144.6 x 354 mm
- Weight
- 9.7 kg
In the box
- Included
- USB cable, slipmat, tone arm illumination
- Not included
- Stylus and headshell