Amperor 3003
A 1000 W stereo power amplifier for PA use, usable in stereo, parallel or mono-bridged mode. It targets small to mid-size PA and subwoofer/satellite setups. The model is listed as discontinued.
- 1000 W PA power amplifier
- Stereo, parallel and mono-bridged modes
- 2x 700 W at 4 ohm; 1x 1400 W bridged at 8 ohm
- Active diplexer adjustable 25 Hz - 150 Hz
- XLR and 6.3 mm jack inputs
- Discontinued by the maker
Fotók
6Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Amperor 3003 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Amperor 3003 is the smallest of the Amperor 3003, 4004 and 5005 power amplifier series. It can run as a normal stereo amp, in parallel, or mono-bridged. Rated output is 2x 500 W at 8 ohm and 2x 700 W at 4 ohm in stereo, or 1x 1400 W at 8 ohm bridged. Frequency response is 20 Hz to 20 kHz.
Protection includes a soft-start limiter, overload and short-circuit protection, transient pulse protection and a thermal protective system. Cooling is by fans with variable speed, and power comes from a switch-mode supply. Channels A and B have separate amplifier circuits.
For system setup there is an active diplexer with an adjustable range of 25 Hz to 150 Hz, a processing switch for equalising audio signals, and a subwoofer/low-cut switch for direct control of subwoofers and satellites. Inputs are XLR and 6.3 mm jacks. Outputs are PA speaker cable connections and 6.3 mm jacks. The unit measures 483 x 88 x 490 mm and weighs 12.0 kg.
Műszaki adatok
- Márka
- Reloop
- Modell
- Amperor 3003
- Kategória
- Élő hang › Erősítők
Audio
- Power class
- 1000 W PRO PA amplifier
- Output power, stereo 8 ohm
- 2x 500 W
- Output power, stereo 4 ohm
- 2x 700 W
- Output power, mono-bridged 8 ohm
- 1x 1400 W
- Frequency range
- 20 Hz - 20 kHz
- Operating modes
- Stereo, parallel, mono-bridged
- Diplexer frequency range
- 25 Hz - 150 Hz (active, adjustable)
Inputs
- Input connectors
- XLR, 6.3 mm jacks
Outputs
- Output connectors
- PA pro speaker cable, 6.3 mm jacks
Controls
- Processing switch
- Equalisation of audio signals
- Subwoofer/low-cut switch
- Direct control of subwoofer/satellites
Power
- Power supply
- Special switch-mode power supply
- Start-up protection
- Soft-start limiter
Protection and cooling
- Protection
- Overload, short circuit, transient pulse, thermal
- Cooling
- High-performance fans with variable speed
- Amplifier circuits
- Separate for channels A and B
Physical
- Dimensions
- 483 x 88 x 490 mm
- Weight
- 12.0 kg