Amperor 3003
A 1000 W stereo power amplifier for PA use, usable in stereo, parallel or mono-bridged mode. It targets small to mid-size PA and subwoofer/satellite setups. The model is listed as discontinued.
- 1000 W PA power amplifier
- Stereo, parallel and mono-bridged modes
- 2x 700 W at 4 ohm; 1x 1400 W bridged at 8 ohm
- Active diplexer adjustable 25 Hz - 150 Hz
- XLR and 6.3 mm jack inputs
- Discontinued by the maker
Billeder
6Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en Amperor 3003, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The Amperor 3003 is the smallest of the Amperor 3003, 4004 and 5005 power amplifier series. It can run as a normal stereo amp, in parallel, or mono-bridged. Rated output is 2x 500 W at 8 ohm and 2x 700 W at 4 ohm in stereo, or 1x 1400 W at 8 ohm bridged. Frequency response is 20 Hz to 20 kHz.
Protection includes a soft-start limiter, overload and short-circuit protection, transient pulse protection and a thermal protective system. Cooling is by fans with variable speed, and power comes from a switch-mode supply. Channels A and B have separate amplifier circuits.
For system setup there is an active diplexer with an adjustable range of 25 Hz to 150 Hz, a processing switch for equalising audio signals, and a subwoofer/low-cut switch for direct control of subwoofers and satellites. Inputs are XLR and 6.3 mm jacks. Outputs are PA speaker cable connections and 6.3 mm jacks. The unit measures 483 x 88 x 490 mm and weighs 12.0 kg.
Specifikationer
- Mærke
- Reloop
- Model
- Amperor 3003
- Kategori
- Live-lyd › Forstærkere
Audio
- Power class
- 1000 W PRO PA amplifier
- Output power, stereo 8 ohm
- 2x 500 W
- Output power, stereo 4 ohm
- 2x 700 W
- Output power, mono-bridged 8 ohm
- 1x 1400 W
- Frequency range
- 20 Hz - 20 kHz
- Operating modes
- Stereo, parallel, mono-bridged
- Diplexer frequency range
- 25 Hz - 150 Hz (active, adjustable)
Inputs
- Input connectors
- XLR, 6.3 mm jacks
Outputs
- Output connectors
- PA pro speaker cable, 6.3 mm jacks
Controls
- Processing switch
- Equalisation of audio signals
- Subwoofer/low-cut switch
- Direct control of subwoofer/satellites
Power
- Power supply
- Special switch-mode power supply
- Start-up protection
- Soft-start limiter
Protection and cooling
- Protection
- Overload, short circuit, transient pulse, thermal
- Cooling
- High-performance fans with variable speed
- Amplifier circuits
- Separate for channels A and B
Physical
- Dimensions
- 483 x 88 x 490 mm
- Weight
- 12.0 kg