RS7
Floor-standing loudspeaker with a quarter-wave transmission line cabinet and a two-and-a-half-way driver layout. A side-firing bass driver makes it easier to place in different rooms, aimed at listeners who want accurate, natural music reproduction.
- Quarter-wave transmission line floor-standing speaker
- Two-and-a-half-way driver system
- HF20-ZRR tweeter and side-firing RR7.8 7-inch bass driver
- Bi-wirable and bi-ampable
- Nominal impedance 6 ohms, sensitivity approx. 89 dB
- Finishes: Natural Cherry, Black Ash, Gloss Piano Black
Billeder
6Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en RS7, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The RS7 is a fairly large floor-standing speaker built around a quarter-wave transmission line enclosure. It uses a two-and-a-half-way driver system, combining a bass/mid unit with a high-frequency unit, with the aim of giving a natural low-frequency response and balanced mid-range.
The tweeter is the in-house HF20-ZRR, designed to remove unwanted rear reflection and so keep distortion low. The 7-inch RR7.8 bass driver fires from the side of the cabinet and uses an 8-layer voice coil, which means no additional crossover is needed for that driver. Because of the side-firing arrangement, the speakers can be turned with the side units facing outwards for a wider sound stage, or swapped over so the side units face each other if imaging becomes less precise.
The speaker is bi-wirable and bi-ampable, and is suited to amplifiers from 30 W to 500 W depending on amplifier quality. It is offered in three finishes: Natural Cherry, Black Ash and Gloss Piano Black. English and French manuals are available.
Video
Specifikationer
- Mærke
- Rega
- Model
- RS7
- Kategori
- Hi-Fi og hjemmelyd › Højttalere
Audio
- Type
- Floor-standing transmission line loudspeaker
- Driver configuration
- Two and a half way
- Enclosure
- Quarter wave transmission line
- High frequency unit
- HF20-ZRR
- Bass/mid unit
- RR125
- Bass driver
- RR7.8 side firing 7" with 8 layer voice coil
- Nominal impedance
- 6 Ohms
- Sensitivity
- Approx. 89dB
Connectivity
- Bi-wirable
- Yes
- Bi-ampable
- Yes
Power
- Power handling
- 125w per channel
- Suitable amplification
- 30w to 500w depending on amplifier quality
Physical
- Height (without spikes)
- 988mm
- Depth (at plinth)
- 346mm
- Width (at plinth)
- 246mm
- Weight
- 17kg
- Finishes
- Natural Cherry / Black Ash / Gloss Piano Black
Documentation
- Manuals
- English, French