Planar 8
A skeletal-plinth belt-drive turntable with an RB880 tonearm, triple-layer glass platter and an external Neo power supply that offers electronic speed change. It is aimed at vinyl listeners who want a high-end Rega deck with a choice of factory-fitted moving magnet or moving coil cartridges.
- RB880 tonearm with preloaded zero-tolerance bearing
- Tancast 8 foam-core plinth with phenolic double brace
- Three-piece laminated Pilkington glass platter
- Neo PSU with electronic 33 1/3 and 45 rpm speed change
- Factory cartridge options: Nd7, Nd9, Ania Pro, Apheta 3
- Matt Polaris grey or matt white finish
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur Planar 8 birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The Planar 8 is a two-speed (33 1/3 and 45 rpm) belt-drive turntable. Its plinth has a Tancast 8 polyurethane foam core between two layers of high-pressure laminate, stiffened by a phenolic resin double brace between the tonearm mount and the main bearing. Rega describes the plinth as 30% lighter than that of the earlier RP8.
The record spins on a three-piece laminated glass platter made from two grades of Pilkington glass, with most of the mass at the rim. It sits on a single-piece machined aluminium sub-platter and a hardened tool steel spindle running in a brass housing. A 24 V synchronous motor is mounted from below and driven by a Neo PSU, which has a DSP generator, an anti-vibration circuit and user-adjustable fine speed control. The belt is a Rega EBLT type.
The RB880 tonearm uses a preloaded zero-tolerance bearing, a thinner stainless steel counterweight and a low-capacitance phono cable with locking phono plugs. Factory-fitted cartridge options include Nd7, Nd9, Ania Pro and Apheta 3. The deck comes in matt Polaris grey or matt white and has a removable single-piece dustcover.
Myndband
Tækniupplýsingar
- Framleiðandi
- Rega
- Líkan
- Planar 8
- Flokkur
- Hi-Fi og heimilishljóð › Plötuspilarar
Audio
- Drive type
- Belt drive
- Selectable speeds
- 33 1/3 rpm, 45 rpm
- Speed change
- Electronic, via Neo PSU
- Fine speed adjustment
- User adjustable, electronic
- Drive belt
- Reference EBLT
- Platter
- Triple layer laminated Pilkington glass
- Tonearm
- RB880
- Motor
- 24 V synchronous, low vibration
- Neo PSU waveform distortion
- Less than 0.15%
Construction
- Plinth
- Tancast 8 polyurethane foam core between HPL layers
- Bracing
- Phenolic resin double brace
- Sub-platter
- Single-piece machined aluminium
- Spindle
- Hardened tool steel
- Bearing housing
- Custom brass
- Finishes
- Matt Polaris grey, matt white
- Dustcover
- Removable, single piece
Physical
- Turntable dimensions (W x H x D, dustcover fitted)
- 420 x 125 x 315 mm
- Turntable weight
- 4.2 kg
- Neo PSU dimensions (W x H x D)
- 180 x 50 x 155 mm
- Neo PSU weight
- 0.6 kg
Connectivity
- Tonearm cable
- Low capacitance phono cable with locking phono plugs
- Cartridge mounting
- Rega three point mounting system
Options
- Factory fitted cartridges
- Nd7 (MM), Nd9 (MM), Ania Pro (MC), Apheta 3 (MC)
- Wall bracket
- Planar 8/10/Naia Wall Bracket, black or white
Warranty
- Warranty
- Lifetime limited warranty against manufacturing defects