Planar 10
A reference-level belt-drive turntable with a skeletal Tancast 8 plinth, ceramic bracing, a factory-fitted RB3000 tonearm and an outboard PL10 power supply. It is aimed at listeners building a high-end vinyl system around a lightweight, rigid design.
- Tancast 8 foam core skeletal plinth with HPL skin
- Ceramic top brace and phenolic resin bottom brace (DB technology)
- RB3000 tonearm with preloaded zero-tolerance bearing
- Diamond-cut ceramic oxide platter
- 24 V synchronous motor with outboard PL10 PSU and electronic speed change
- Matt Polaris grey or matt white finish; lifetime limited warranty
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Planar 10, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The Planar 10 is built around a skeletal plinth made from a Tancast 8 polyurethane foam core between two layers of high-pressure laminate. A ceramic top brace and a phenolic resin bottom brace sit between the tonearm mount and the main bearing. The plinth is described as 30% lighter than the original RP10 while being stiffer.
The platter is a ceramic oxide flywheel that is fired and diamond cut for flatness. It turns on a low-mass hub bearing with a one-piece machined aluminium sub-platter and a hardened tool steel spindle in a brass housing. A 24 V synchronous motor, mounted from underneath, drives the platter through an EBLT belt. Each motor is hand-tuned to its own PL10 PSU, which provides electronic speed change and fine speed adjustment.
The RB3000 tonearm has a preloaded bearing assembly and an aluminium arm tube, and uses no adhesive in its construction. An Apheta 3 or Aphelion 2 cartridge can be factory fitted as an option. It comes with a removable single-piece dust cover and in two matt finishes.
Físeán
Sonraíochtaí
- Branda
- Rega
- Samhail
- Planar 10
- Catagóir
- Hi-Fi agus fuaim an tí › Plátaí casaidh
Turntable
- Drive type
- Belt drive (EBLT reference belt)
- Plinth
- Tancast 8 foam core with HPL skin
- Bracing
- Ceramic top brace, phenolic resin bottom brace
- Platter
- Ceramic oxide, diamond cut
- Main bearing
- Machined aluminium sub-platter, hardened tool steel spindle, brass housing
- Dust cover
- Removable single-piece
Tonearm and cartridge
- Tonearm
- RB3000
- Arm tube
- Hand-polished aluminium
- Factory-fitted cartridge options
- Apheta 3 or Aphelion 2 (optional)
Motor and power
- Motor
- 24 V synchronous, low vibration
- Power supply
- PL10 PSU (P10 PSU), outboard
- Speed control
- DSP generator on a crystal reference, electronic speed change
- Fine speed adjustment
- User adjustable, electronic
Physical
- Turntable dimensions (W x H x D)
- 420 x 115 x 350 mm (with dust cover fitted)
- Turntable weight
- 4.7 kg
- PSU dimensions (W x H x D)
- 218 x 80 x 320 mm
- PSU weight
- 3 kg
- Finishes
- Matt Polaris grey, matt white
Warranty
- Warranty
- Lifetime limited warranty against manufacturing defects