Elex-R
Integrated stereo amplifier with a built-in phono stage, rated at 72.5 W per channel into 8 Ω. It has four line inputs, pre-out and record out, and a remote, and suits listeners building a two-channel system around turntables, CD players and DACs.
- 72.5 W per channel into 8 Ω, 90 W into 6 Ω, 113 W into 4 Ω
- Integrated phono stage plus four line inputs
- Pre-amp out and record out
- Combined feedback and passive volume control
- Full-width case with a new custom transformer
- No tone controls or headphone socket; remote included
Grianghraif
6Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Elex-R, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The Elex-R is a stereo integrated amplifier that combines the Brio-R design with the power circuits and phono stage of the Elicit-R. It sits in a full-width case with improved heat dissipation and a larger custom transformer, and is rated at 72.5 W per channel into 8 Ω, 90 W into 6 Ω and 113 W into 4 Ω with both channels driven. Typical distortion is given as 0.007%.
The volume control combines feedback and passive attenuation, using a custom chip, a microcontroller and a custom rotary control. Channel matching is set by close-tolerance parts in the pre-amp circuit instead of the potentiometer. The output stage is a low-impedance Class-A-style emitter follower built around complementary Sanken Darlington transistors. There are no tone controls and no headphone socket, to keep the signal path short.
Connections are a high-specification integrated phono input, four line inputs, a pre-amp output and a record (tape) output. A small remote handset is included, and a multilingual user manual is available.
Físeán
Sonraíochtaí
- Branda
- Rega
- Samhail
- Elex-R
- Catagóir
- Hi-Fi agus fuaim an tí › Méadaitheoirí
Audio
- Output power, 8 Ω (both channels driven)
- 72.5 W (design centre rating)
- Output power, 6 Ω (both channels driven)
- 90 W (Rega speaker impedance rating)
- Output power, 4 Ω (both channels driven)
- 113 W
- Distortion (typical)
- 0.007%
- Output transistors
- Complementary Sanken Darlington pair, 150 W
Inputs
- Line inputs
- 4
- Phono input
- Integrated phono stage
- Phono sensitivity (72.5 W, 8 Ω)
- 1.7 mV (load 47 kΩ in parallel with 220 pF)
- Phono maximum input level
- 100 mV
- Line sensitivity (72.5 W, 8 Ω)
- 164 mV (load 30–50 kΩ)
- Line maximum input level
- 10 V
Outputs
- Pre-amp output
- Yes
- Tape/record output level
- 164 mV with rated input
- Tape/record output impedance
- 470
- Line output level
- 625 mV with rated input
- Line output impedance
- 600
Power
- Voltage
- 230 V & 115 V
- Frequency
- 60/60 Hz
- Power consumption
- 250 W
- Fuse, 230 V
- T3.15AL 20 mm
- Fuse, 115 V
- T5AL 20 mm
Physical
- Dimensions (W x D x H)
- 430 x 320 x 80 mm
In the box
- Remote
- Dedicated mini remote handset
- Documentation
- Multi-lingual user manual