Apheta 2
The Apheta 2 is a moving coil phono cartridge from Rega with a neodymium magnet and a hand-wound coil on a reduced-size iron cross. It suits vinyl listeners looking for a high-end MC cartridge, such as for RP8 and RP10 turntables.
- Moving coil cartridge, second generation of the Apheta
- Iron cross and coil assembly 50% smaller than the original
- Neodymium magnet and Vital profile nude diamond stylus
- No tie wire and no foam damper
- Single-piece anodised aluminium body with clear rigid cover
- Tracking force 1.75–2.00 g, output 350 µV
Fotky
6Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať Apheta 2, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The Apheta 2 is the second generation of Rega's moving coil cartridge. Its coil is wound by hand on an iron cross that is 50% smaller than the one in the original Apheta, which lowers moving mass so the stylus can follow the groove more closely. A neodymium magnet and fine wire complete the generator, and the stylus is a Vital profile nude diamond.
Unlike conventional MC designs, it uses neither a steel tie wire nor a foam damper, avoiding the resonance and ageing problems associated with that approach. The body is a single-piece anodised aluminium moulding, and a rigid clear cover protects the internal fine wires while the cartridge is being fitted.
Electrically it has a 350 µV nominal output, 10 ohm output impedance and a recommended 100 ohm input load. Tracking force is 1.75–2.00 g. It is intended to pair with the Rega RP8 and RP10 turntables and the Aria MM/MC phono stage, and an instruction sleeve is available as a download.
Video
Parametre
- Značka
- Rega
- Model
- Apheta 2
- Kategória
- DJ vybavenie › Prenosky a ihly
Audio
- Cartridge type
- Moving coil (MC)
- Nominal output voltage
- 350 µV
- Output impedance
- 10 ohms
- Input load impedance
- 100 ohms
- Channel balance
- ≥ 20 µV
- Separation
- ≥ -29 dB
Setup
- Tracking pressure
- 1.75 - 2.00 g
- Stylus
- Vital profile nude diamond
Construction
- Magnet
- Neodymium
- Coil assembly
- Hand wound on iron cross, 50% smaller than original Apheta
- Wire
- High specification fine wire
- Suspension
- No tie wire, no foam damper
- Body
- Single piece anodised aluminium
- Stylus protection
- CAD designed clear rigid cover
Compatibility
- Recommended turntables
- RP8, RP10
- Complementary phono stage
- Aria MM / MC stage
Software
- Downloads
- Instruction sleeve