
Aphelion
The Aphelion is a hand-built moving coil phono cartridge, the third generation of Rega's MC design, intended for vinyl listeners using high-end turntable setups. It is presented as a partner for the RP10 turntable and RB2000 tonearm.
- Third-generation Rega moving coil cartridge, hand built
- Boron rod cantilever
- Nude diamond 'Vital' stylus rotated through 90 degrees
- Nominal output 350µV, output impedance 10 ohms
- Tracking force 1.75 - 2.00g
- Black anodised aluminium body with clear protective cover
Fotografije
5Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao Aphelion, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The Aphelion is a moving coil cartridge built by hand and developed over two years. It builds on the technology of the Apheta 2 with a new boron rod cantilever for added stiffness and tracking accuracy. The stylus is a nude diamond with a 'Vital' profile, rotated through 90 degrees to make the diamond mount more rigid.
The generator uses a neodymium magnet and a coil hand wound with 0.018mm fine wire on an iron micro cross. This assembly is described as 50 percent smaller than that of the original design, which lowers the moving mass and helps the stylus follow the groove.
The body is a single-piece, black anodised aluminium part that was redesigned for this model. A clear rigid cover, designed in CAD, shields the internal fine wires while the cartridge is being fitted. Being a low-output moving coil design, it is loaded at 100 ohms and is used with a phono stage that accepts MC cartridges. A manual is available as a download.
Videozapis
Specifikacije
- Marka
- Rega
- Model
- Aphelion
- Kategorija
- DJ oprema › Gramofonske glave i igle
Electrical
- Cartridge type
- Moving coil
- Nominal output voltage
- 350µV
- Output impedance
- 10 ohms
- Input load impedance
- 100 ohms
- Channel balance
- ≥ 10µV
- Separation
- ≥ -29dB
Playback
- Tracking pressure
- 1.75 - 2.00g
- Stylus
- Nude diamond, 'Vital' profile rotated through 90 degrees
- Cantilever
- Boron rod
Generator
- Magnet
- Miniaturised neodymium
- Coil and core
- Iron micro cross and coil assembly
- Coil wire
- Fine wire, 0.018mm
Physical
- Body
- Graded zero tolerance black anodised aluminium
- Cover
- Clear rigid cover
- Construction
- Hand built
Compatibility
- Complementary turntable
- RP10
- Complementary tonearm
- RB2000