Ania
The Ania is a moving-coil phono cartridge with a glass-filled PPS body, an elliptical diamond stylus and an aluminium cantilever. It is aimed at vinyl listeners who want a hand-wound MC design that fits Rega tonearms without separate overhang setting.
- Moving-coil cartridge with undamped, tie-wire-free generator
- Coil hand wound from 0.018 mm wire on an iron micro cross
- Elliptical diamond stylus on an aluminium cantilever
- Glass-filled PPS body with three-point Rega fixing
- Nominal output 350 μV; tracking force 1.75 - 2.00 g
- Lifetime limited warranty against manufacturing defects
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Ania, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The Ania is a low-mass moving-coil cartridge built around a coil hand wound from 0.018 mm wire on an iron micro cross, driven by a high-power neodymium magnet. The generator is undamped, with no tie wire, and the cantilever sits on a rhomboid pivot. It carries an elliptical diamond stylus on an aluminium cantilever.
The body is moulded from PPS with 40% glass and fitted with stainless steel inserts. This replaces the machined aluminium body used on Rega's higher-priced MC models. It uses Rega's three-point fixing, so overhang is set automatically when it is fitted to a Rega tonearm. A rigid clear cover protects the fine internal wires during handling and fitting.
It is intended for an MC-capable phono stage. The recommended load is 100 Ω and 1000 pF, with the gain on high, which is the 'On' position on Rega phono stages. It is listed as an optional upgrade for the Planar 3 with its RB330 tonearm.
Físeán
Sonraíochtaí
- Branda
- Rega
- Samhail
- Ania
- Catagóir
- Trealamh DJ › Cartúis agus stílí
Electrical
- Cartridge type
- Moving coil (MC)
- Nominal output voltage
- 350 μV
- Output impedance
- 10 Ω
- Input load impedance
- 100 Ω
- Channel balance
- ≥ 20 μV
- Separation
- ≥ -29 dB
Playback
- Tracking pressure
- 1.75 - 2.00 g
- Stylus profile
- Elliptical
- Cantilever
- Aluminium
- Coil wire
- 0.018 mm fine wire
- Magnet
- Neodymium
Phono stage settings
- Impedance
- 100 Ω
- Capacitance
- 1000 pF
- Gain setting
- High ('On' position for Rega phono stages)
Physical
- Body material
- PPS (Polyphenylene Sulphide) with 40% glass
- Inserts
- Stainless steel
- Mounting
- Rega three-point fixing
- Pivot
- Rhomboid
Warranty
- Warranty
- Lifetime limited warranty against manufacturing defects