X-Amp 500
The X-Amp 500 is a 500-series active reamper module that sends a pre-recorded, line-level track back out to guitar amps and pedals. It is aimed at recording and mixing engineers who want to re-tone guitar parts after tracking.
- 500 series active reamper module
- 100% discrete class-A electronics
- Two transformer-isolated hi-Z 1/4" outputs
- Independent level control per output
- Ground lift on each output
- 180º polarity switch for both outputs
Billeder
7Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en X-Amp 500, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The X-Amp 500 takes a balanced line-level signal from the rack's rear-panel XLR input and converts it to an unbalanced, buffered, instrument-level signal. This lets a dry, previously recorded guitar track be played back through amplifiers and effects, so tone and microphone placement can be settled after the performance has been captured.
The signal path uses discrete class-A electronics and feeds two transformer-isolated high-impedance outputs on front-panel 1/4" jacks. Each output has its own level control and a ground lift to help reduce hum from ground loops. A 180º polarity switch brings both amps into phase if they are out of phase with each other.
It can also be used as a distribution stage: with a guitar plugged into the Omniport of a Workhorse rack, the signal can be sent to two amplifiers up to 15 meters (50 feet) away. Alternatively, the dry guitar can be sent from the rack's XLR output to a DAW for later reamping.
Video
Specifikationer
- Mærke
- Radial Engineering
- Model
- X-Amp 500
- Kategori
- Studie › Preamps og outboard
Inputs
- Input connector
- XLR, balanced, line level (500 series rack rear panel)
- Input signal
- Pre-recorded balanced line-level track
Outputs
- Outputs
- 2 (Out-1 and Out-2)
- Output connectors
- 1/4" jacks, front panel
- Output type
- Transformer isolated, hi-Z guitar level
- Maximum cable distance
- 15 meters (50 feet)
Audio
- Circuit design
- 100% discrete class-A
- Signal conversion
- Unbalances and buffers the input signal
- Isolation
- Transformer isolated outputs
Controls
- Level controls
- Independent level control for each output
- Ground lift
- On each 1/4" output
- Polarity
- 180º switch
Physical
- Format
- 500 series module
- Part number
- R700 0130 00
- Compatible rack
- 500 series racks, including Radial Workhorse
Software
- Use with DAW
- Reamp pre-recorded tracks played back from a DAW