Switchbone V2
The Switchbone V2 is a transformer-isolated ABY amp switcher with a clean boost for guitarists who run two or three amps. It switches between amps silently and removes buzz and hum caused by ground loops. The unit is discontinued.
- Amp switcher and booster for two or three amps
- 100% discrete Class-A signal path
- Opto-coupler for noiseless switching
- Transformer isolation removes buzz and hum
- Drag control load correction for natural tone
- Discontinued; part # R800 7081 00
Ritratti
5Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ Switchbone V2, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The Switchbone V2 lets a player route one instrument to two or three amplifiers and change between them without audible switching noise. The switching is done with an opto-coupler, and the signal path is fully discrete Class-A. A transformer isolates the outputs to remove buzz, hum and ground-loop noise. A Drag control corrects the load seen by the instrument so the tone stays natural.
Beyond switching, the unit includes a high-powered clean boost that can be engaged for solos. It can be used as a standard ABY splitter, as an ABC selector by using the tuner/out-C output as a third amp feed, or as a channel selector for older two-channel amps. In that last case the Slingshot output can be used to control amp settings such as reverb.
The manufacturer lists the product as discontinued and no longer shipping, and it keeps the user guide and smart sheet available for owners. The part number is R800 7081 00.
Vidjo
Speċifikazzjonijiet
- Marka
- Radial Engineering
- Mudell
- Switchbone V2
- Kategorija
- Effetti u pedali
General
- Product type
- Amp Switcher & Booster
- Part number
- R800 7081 00
- Status
- Discontinued, no longer shipping
Audio
- Signal path
- 100% discrete Class-A
- Switching
- Opto-coupler, noiseless
- Isolation
- Transformer isolated
- Load correction
- Drag control
- Boost
- High-powered clean boost
Outputs
- Amp outputs
- Two or three amps (ABY / ABC)
- Third output
- Tuner/out-C can feed a third amp
- Slingshot output
- Controls amp settings such as reverb
- Output buffering
- Buffered outputs
Applications
- ABY mode
- Standard ABY setup
- ABC mode
- Three-amp selector via tuner/out-C
- Channel selector
- Toggles two amp channels on older amps
Documentation
- Resources
- User Guide and Smart Sheet