PZ-Select
Two-channel instrument switcher for players who alternate between electric and acoustic instruments, or use hybrid guitars with magnetic and piezo pickups. It has separate outputs for a stage amp and the PA, and is now discontinued.
- Two channels: magnetic electric and piezo acoustic
- Class-A buffer with Drag Control load correction
- 10 megohm input impedance on piezo channel
- 3-position high-pass filter, low-pass filter, polarity reverse
- 1/4 inch amp output plus balanced XLR direct out
- Effects loop on piezo channel and tuner out
Fotos
6Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um PZ-Select, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The PZ-Select is a floor-based footswitch unit with two channels. Channel one is meant for a magnetic electric pickup and uses a class-A buffer paired with Drag Control load correction to keep the tone natural. Channel two is meant for a piezo or acoustic source and presents a 10 megohm input impedance, with a 3-position high-pass filter, a low-pass filter and a 180 degree polarity reverse to tame harshness, muddiness and resonant feedback.
Two outputs are provided: a standard 1/4 inch output for a stage amp and a built-in direct box with a low-impedance balanced XLR output for the PA. A dedicated effects loop on the piezo channel lets pedals feed both outputs. Each channel is chosen with its own footswitch, and large LEDs show which one is active. A tuner output carries the combined signal of both pickups even when the unit is switched off, so tuning can be done silently.
A hybrid guitar connects through a single TRS stereo cable. Typical setups include hybrid guitar to amp and PA, electric and upright bass to two amps, PA and tuner, or electric and acoustic guitars sent to different destinations.
Especificações
- Marca
- Radial Engineering
- Modelo
- PZ-Select
- Categoria
- Som ao vivo › Outro equipamento de som ao vivo
General
- Part number
- R800 7208
- Type
- Two Channel Instrument Switcher
- Channels
- 2 (electric and acoustic)
- Switching
- Two footswitches, one per channel
- Status
- Discontinued
Inputs
- Channel 1
- Magnetic-electric pickup input
- Channel 2
- Piezo-acoustic input
- Piezo input impedance
- 10 meg-Ohm
- Hybrid guitar connection
- 1/4" TRS stereo cable
Outputs
- Stage amp output
- Standard 1/4"
- PA output
- Low-Z balanced XLR via built-in Radial DI
- Tuner output
- Dedicated, combined signal from both pickups, active even when off
Audio
- Electric channel buffer
- Class-A buffer
- Load correction
- Drag Control
- High-pass (low cut) filter
- 3-position
- Low-pass (high-cut) filter
- Included
- Polarity reverse
- 180 deg
- Effects loop
- Dedicated, on piezo channel, feeds both outputs
Controls and indicators
- Channel indicators
- Bright full-sized LEDs