PZ-Pro
The PZ-Pro is a two-channel acoustic instrument preamp, DI and switcher in a pedal format. It suits players who need to switch between or blend two instruments, or an instrument and a microphone, with separate EQ, feedback filters and an effects loop.
- Two channels, each with its own semi-parametric EQ
- Variable notch or high-pass filter per channel for feedback control
- Piezo booster on both channels
- XLR mic input on channel 2 with 48V phantom power
- Assignable FX loop with wet/dry control
- Balanced XLR DI outs, pre-EQ and post-EQ
Photos
8Listings
No listings of this model yet
When someone sells a PZ-Pro, the listings and the sales history will show here.
Sell one like thisDescription
The PZ-Pro gives each of its two channels its own semi-parametric equalizer, input level and filter section, with a variable notch or high-pass filter for reducing feedback. Channel 1 and channel 2 each have a piezo booster for smoothing the response of piezo-equipped instruments. Magnetic pickups, instruments with on-board preamps and piezo transducers can all be connected.
Channel 2 adds an XLR microphone input with 48V phantom power, so a dynamic, condenser, clip-on instrument or vocal microphone can be blended with a pickup or run through guitar pedals. An assignable effects loop with a wet/dry control can be placed on channel A, channel B or both, and can be switched by footswitch or left always on. Three footswitches select the channel, toggle the clean boost and effects loop, and mute the signal for silent tuning.
Balanced XLR direct outputs send the signal to a PA system or recording interface, with both pre-EQ and post-EQ outputs available. A power supply is included.
Video
Specifications
- Brand
- Radial Engineering
- Model
- PZ-Pro
- Category
- Effects and pedals
Inputs
- Channels
- 2
- Channel 2 microphone input
- XLR
- Phantom power
- 48V, channel 2
- Compatible sources
- Magnetic pickups, instruments with on-board preamps, piezo transducers, dynamic and condenser microphones
- Piezo booster
- Both channels
Audio
- EQ
- Semi-parametric, separate for each channel
- Feedback filter
- Variable notch or high-pass, per channel
- Input level control
- Per channel
- Clean boost
- Variable, footswitch-activated
Outputs
- Direct outputs
- Balanced XLR
- DI output points
- Pre-EQ and post-EQ
Effects loop
- FX loop
- Assignable to channel A, B or both
- FX loop mix
- Wet/dry control
- FX loop activation
- Footswitch or always on
Controls
- Footswitches
- 3
- Footswitch functions
- Channel select, boost and FX loop, mute
- Mute
- Silent tuning on stage
Physical
- Format
- Pedal-style floor unit
- Part number
- R800 7089 00
In the box
- Power supply
- Included, part no. R800 9415