ProMS2
Passive two-way microphone splitter that sends one mic signal to three destinations: two direct outputs and one transformer-isolated output. Intended for live sound, broadcast and studio users who need to feed several mixers or recorders from a single microphone.
- Passive splitter: one mic input to three outputs
- One Eclipse transformer-isolated output, two direct outputs
- Phantom power return path on the main direct output
- Output ground lifts and an input pad for line-level sources
- Rack mountable; up to eight fit in a Radial J-Rak
- Part no. R800 1122 00
Fotky
7Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať ProMS2, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The ProMS2 takes a balanced microphone signal at an XLR input and divides it between three XLR outputs without active circuitry. An Eclipse transformer provides galvanic isolation on one output, which removes hum and buzz caused by ground loops between systems. The other two outputs are direct. One of them carries the phantom power return path so 48V can reach the microphone from the main console.
Ground lifts on the outputs further reduce noise, and an input pad lets line-level sources be connected as well. Typical uses include feeding front-of-house and monitor consoles plus a recorder from one microphone, splitting to two mixers, or comparing two mic preamps in the studio.
The unit is portable for stage use and can also be rack mounted for touring or installation. Up to eight units fit in the Radial J-Rak. Optional accessories include the J-Rak 4, J-Rak 8, J-Clamp flange mount and TrainTrack Plus pedalboard brackets.
Video
Parametre
- Značka
- Radial Engineering
- Model
- ProMS2
- Kategória
- Živý zvuk › Iné vybavenie (live)
Inputs
- Input connector
- XLR
- Input pad
- Yes, allows line-level sources
- Signal type
- Balanced mic level
Outputs
- Number of outputs
- 3
- Direct outputs
- 2
- Isolated outputs
- 1 (transformer-isolated)
- Phantom power return path
- 48V, on main direct output
- Ground lifts
- Yes, on outputs
Audio
- Circuit type
- Passive
- Transformer
- Eclipse
- Split configuration
- 2-way / 3-way
Physical
- Rack mounting
- Yes, up to eight in a J-Rak
- Compatible rack adapters
- J-Rak 8, J-Rak 4
- Flange mount adaptor
- J-Clamp
- Pedalboard mounting
- TrainTrack Plus brackets
- Part number
- R800 1122 00