JX44
The JX44 is a guitar signal manager and switcher for professional stages that combine wireless guitar systems, acoustic instruments, effects and several amplifiers. It selects between up to four guitars and six amps and is now discontinued.
- Selects between up to 4 guitars and 6 amps
- Programmable with optional JR5 footswitch
- Built-in DI box, SGI line driver and X-Amp reamper
- Transformer isolation removes ground loops
- Level controls on inputs 3 and 4
- Discontinued; part number R800 6500 00
Fotografije
5Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal JX44, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The JX44 routes up to four instruments to as many as six amplifiers, so that guitar changes and amp changes can be made quickly between songs. It is aimed at large concert stages where wireless systems, acoustic guitars, effects and multiple amps are in use at once. Inputs 3 and 4 each have an individual level control, which helps balance different instruments against one another.
A DI box, an SGI line driver and an X-Amp reamper are built in. The DI can feed the PA system while the instrument signal goes on to the amps, and in the studio it can capture a clean track that is later sent back through the reamp section to drive up to six amplifiers at once. Transformer isolation is used to remove ground loops.
The unit can be programmed with the optional JR5 footswitch, which remotely controls the amps or effects loops and recalls different scenes for fast changes of setup. The maker has marked the product as discontinued and no longer shipping, with specifications and user information kept available for existing owners.
Video
Specifikacije
- Znamka
- Radial Engineering
- Model
- JX44
- Kategorija
- Ozvočenje › Drugo ozvočenje
Inputs
- Instrument selection
- Up to 4 guitars
- Input level controls
- Individual level controls on inputs 3 and 4
Outputs
- Amplifier selection
- Up to 6 amps
- Simultaneous reamp outputs
- Up to 6 amplifiers
- PA feed
- Built-in Radial DI
Audio
- Direct box
- Built-in DI
- Line driver
- Built-in SGI
- Reamper
- Built-in X-Amp
- Isolation
- Transformer isolated to eliminate ground loops
Control
- Remote control
- Programmable with optional JR5 footswitch
- Scene recall
- Scenes for amps or effects loops via JR5
General
- Part number
- R800 6500 00
- Type
- Guitar signal manager and switcher
- Status
- Discontinued, no longer shipping