JX42 V2
The JX42 V2 is a guitar and amp switcher that selects among four instrument inputs and two amplifier outputs, with buffered tuner outputs and transformer-isolated amp feeds. It suits touring and gigging players who change guitars or amps on stage and want footswitch or MIDI control.
- 4 instrument inputs, 2 amplifier outputs
- Jensen transformer-isolated amp outputs with ground lifts
- Buffered tuner outputs on front and rear panels
- Remote control via JR-5, JR-2 footswitches or MIDI
- Built-in 120/240V power supply
- Silent, pop-free switching between amp outputs
Billeder
8Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en JX42 V2, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The JX42 V2 routes up to four instruments to two amplifiers. Each input has a large backlit on/off switch, and more than one instrument can be active at once. Inputs can be plugged in at the front or the rear panel, and Class-A buffers keep the signal intact. Inactive inputs feed always-on tuner outputs, which are buffered and mirrored front and rear.
Both amp outputs use Jensen transformers for isolation and have ground lift switches to reduce hum when several amps are connected. Changing between outputs is silent, with no pops or clicks. The two outputs can drive separate amps or serve as a main and backup pair of amps or modelers, with a switch to the backup from the front panel or a remote.
Remote control comes from the optional JR-5 footswitch for the inputs, the optional JR-2 footswitch for amp switching or muting both outputs, or a MIDI controller or pedalboard through the built-in MIDI input. A built-in 120/240V power supply allows use on tours in different regions.
Video
Specifikationer
- Mærke
- Radial Engineering
- Model
- JX42 V2
- Kategori
- Live-lyd › Andet live-udstyr
Inputs
- Instrument inputs
- 4
- Input locations
- Front or rear panel
- Input buffering
- Class-A signal buffers
- Input selection
- Backlit on/off switches, multiple inputs can be active
- MIDI input
- Built-in
Outputs
- Amplifier outputs
- 2 (A and B)
- Output isolation
- Jensen transformers
- Ground lift
- Switches on amp outputs
- Tuner outputs
- Buffered, front and rear panel
- Output switching
- Silent, no pops or clicks
Connectivity
- Remote input control
- Optional JR-5 footswitch
- Remote amp control
- Optional JR-2 footswitch (switch or mute outputs)
- MIDI control
- Input switching via MIDI controller or pedalboard
Power
- Power supply
- Built-in, 120/240V
Physical
- Part number
- R800 6507 00
- Product type
- 4 Input, 2 Output Guitar and Amp Switcher