JS2
A passive two-way microphone splitter that sends one mic signal to three destinations: one transformer-isolated output and two direct outputs. It suits live sound and studio users who need to feed two consoles or compare two preamps.
- Passive 2-way mic splitter with one isolated and two direct outputs
- Jensen transformer for galvanic isolation on the isolated output
- Ground lifts on the outputs to reduce hum and buzz
- Input pad allows line-level sources to be connected
- Main output carries the 48V phantom power return path
- Up to eight units fit in a Radial J-Rak
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur JS2 birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The JS2 takes a single balanced microphone signal and distributes it to three outputs without active electronics. One output is isolated through a Jensen transformer, which breaks ground loops and removes the hum and buzz they cause between systems. The other two outputs are direct. Ground lifts on the outputs help reduce noise further, and an input pad allows line-level sources to be connected as well.
In live use it can feed front-of-house and monitor consoles from the same microphone, with the isolated path keeping the two desks electrically separate. The main output provides the 48V phantom power return path to the microphone. In the studio it can send one microphone to two preamps so their sound on the same source can be compared, without adding colour or distortion of its own.
The JS2 is a compact unit for portable use on stage or in the studio. It can be rack mounted, with up to eight fitting in the Radial J-Rak, and the maker lists TrainTrack Plus brackets for mounting under a pedalboard and the J-Clamp for fixed installation.
Myndband
Tækniupplýsingar
- Framleiðandi
- Radial Engineering
- Líkan
- JS2
- Flokkur
- Lifandi hljóð › PA-hátalarar
Audio
- Type
- Passive 2-way microphone splitter
- Transformer
- Jensen
- Signal level
- Mic level balanced
- Input pad
- Yes, allows line-level sources
- Isolation
- Galvanic isolation on the isolated output
Outputs
- Total outputs
- 3 (one per destination)
- Transformer-isolated outputs
- 1
- Direct outputs
- 2
- Ground lifts
- On the outputs
- Phantom power
- 48V return path via main output
Power
- Power requirement
- Passive, no power required
Physical
- Rack mounting
- Up to 8 units in a Radial J-Rak
- Pedalboard mounting
- TrainTrack Plus brackets (accessory)
- Fixed mounting
- J-Clamp (accessory)
In the box
- Part number
- R800 1022 00
- Documentation
- Owner's manual and smart sheet available
- Related splitters
- JS3, ProMS2, OX8, LX-2