Headload
A passive guitar amp power attenuator and load box that sits between an amp head and speaker cabinet, combining reduced-volume playing with direct recording outputs. Aimed at guitarists and bassists who want amp tone at low stage or home volumes. Now discontinued.
- Power attenuator and load box with speaker emulation
- Handles up to 130 W RMS (180 W peak)
- Available in 4, 8 or 16 ohm versions
- Attenuates down to 1% of total power
- Two built-in JDX amp DIs, pre-EQ and post-EQ
- Built-in Phazer and headphone amplifier
Fotos
8Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um Headload, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The Headload connects between an amplifier and its speaker cabinet and lowers the level reaching the speaker so the amp can be driven hard at manageable volume. A 6-position rotary switch sets the amount of power reduction, from unaltered signal down to complete silence, and the unit can attenuate to 1% of total power. It handles up to 130 watts RMS (180 watts peak) and is offered in 4, 8 or 16 ohm versions.
Two built-in JDX amp direct boxes provide a pre-EQ and a post-EQ feed, so a recording can be made without a microphone on the cabinet. When a mic is used as well, an integrated Phazer circuit time-aligns the direct and miked signals. With the speaker output fully attenuated the unit acts as a dummy load for silent recording, and a headphone amplifier allows quiet practice.
Typical uses include reducing stage sound pressure so the engineer can mix more easily, recording silently via the JDX Reactor, and blending the direct feed with a microphone. The maker lists the product as discontinued and no longer shipping, with a user guide and smart sheet available for existing owners.
Vídeo
Especificações
- Marca
- Radial Engineering
- Modelo
- Headload
- Categoria
- Som ao vivo › Amplificadores
General
- Type
- Guitar amp load box and power attenuator with DI
- Part number
- R800 7058 00
- Status
- Discontinued
- Speaker emulation
- Yes
Power
- Power handling (RMS)
- 130 watts
- Power handling (peak)
- 180 watts
- Minimum output level
- 1% of total power
- Attenuation control
- 6-position rotary switch
Impedance
- Available load impedances
- 4, 8 or 16 ohms
Outputs
- Direct outputs
- 2 built-in JDX amp DIs (pre-EQ and post-EQ)
- Headphone output
- Built-in headphone amplifier
Audio
- Phase alignment
- Built-in Radial Phazer
- Silent recording
- Dummy load operation with JDX Reactor
- Signal position
- Between amplifier and speaker
Documentation
- Resources
- User guide and smart sheet