DiNET DAN-TX2
Two-channel analog-to-Dante transmitter that sends line-level sources onto a Dante or AES67 network. Suited to live sound, install and AV users who need to bring mixers, laptops or phones onto a networked audio system.
- 2-channel analog to Dante / AES67 transmitter
- 24bit/96kHz analog to digital conversion
- XLR, 1/4" TRS and 3.5mm stereo aux inputs
- Handles input levels up to +24dBu
- Trim and pad per channel, with link switch
- PoE plus external supply for redundant power
Fotografije
6Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal DiNET DAN-TX2, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The DiNET DAN-TX2 is a compact endpoint that converts two channels of analog audio to digital at 24-bit/96kHz and transmits them over a Dante or AES67-compliant network. It accepts balanced signals on combination XLR/TRS inputs as well as unbalanced stereo from a 3.5mm aux jack, so it can take feeds from mixers, recorders, audio interfaces, laptops, smartphones and tablets without special software.
Each channel has a trim control and a pad switch, and a link switch lets the Channel 1 controls govern both sides when a stereo source is connected. The balanced inputs handle levels up to +24dBu.
The unit connects through an RJ45 network port that works with Neutrik etherCON connector carriers. It can be powered by Power over Ethernet or by the supplied external power supply, and using both together provides redundant power for critical applications. An optional SA series rack adaptor allows mounting in a 19-inch rack.
Video
Specifikacije
- Znamka
- Radial Engineering
- Model
- DiNET DAN-TX2
- Kategorija
- Studio › Avdio vmesniki
Inputs
- Channels
- 2
- Balanced inputs
- XLR / 1/4" TRS
- Aux input
- 3.5mm stereo
- Maximum input level
- +24dBu
- Input controls
- Trim and pad switch per channel
- Link switch
- Channel 1 controls both channels
Audio
- Conversion
- 24bit/96kHz analog to digital
- Audio over IP
- Dante and AES67 compliant
Connectivity
- Network connection
- RJ45
- Connector carrier compatibility
- Neutrik etherCON
Power
- Power options
- Power over Ethernet (PoE) or external power supply
- Redundant powering
- External power supply and PoE used simultaneously
Physical
- Rack mounting
- 19" rack with optional SA series rackmount adaptor kit
- Part number
- R800 1064 00
In the box
- Power supply
- External power supply included (R800 9415)