Cab-Link
Passive speaker cabinet merger that lets a guitar or bass player connect a single amplifier speaker output to two cabinets, wired in series or parallel. It also has a level-controlled line output for feeding a second amp or effects unit.
- Connects one amp speaker output to two cabinets
- Series or parallel wiring, selected by input used
- Fully passive, no power required
- Line output with level control
- Top-panel guide for impedance matching
- Part no. R800 7088 00
Ritratti
7Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ Cab-Link, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The Cab-Link is a compact, fully passive box that splits one amplifier speaker output across two speaker cabinets. The amp head connects to either a series input or a parallel input, and the unit reconfigures itself according to the input used. A guide printed on the top panel shows which input best matches the impedance between amplifier and cabinets.
Two speaker outputs go to the cabinets. In series, two 8 Ohm cabinets can be used with a 16 Ohm amplifier output; in parallel, two 8 Ohm cabinets can be run from a single 4 Ohm amplifier output.
A separate line output with its own level control can feed the input of another amplifier or an effects unit, for example in a wet/dry setup with a second amp. Because the unit is passive, it needs no power supply. Connections are made with standard speaker cables.
Vidjo
Speċifikazzjonijiet
- Marka
- Radial Engineering
- Mudell
- Cab-Link
- Kategorija
- Aċċessorji › Aċċessorji oħra
Inputs
- Amplifier inputs
- Series input and parallel input
- Input source
- Single amplifier head speaker output
- Input connection
- Speaker cable
Outputs
- Speaker outputs
- 2 (one per cabinet)
- Line output
- 1, with level control
- Line output use
- Feeds another amplifier or an effects unit
- Output connection
- Speaker cables to each cabinet
Audio
- Series example
- Two 8 Ohm cabinets with a 16 Ohm amplifier output
- Parallel example
- Two 8 Ohm cabinets with a 4 Ohm amplifier output
- Configuration switching
- Automatic, according to input used
- Impedance guide
- Printed on top of the unit
Power
- Power
- Completely passive, no power needed
Physical
- Form factor
- Compact
- Type
- Passive speaker cabinet merger
General
- Manufacturer
- Radial Engineering
- Part number
- R800 7088 00