Bassbone V2
A two-channel bass preamp with a built-in Radial DI, made for players who switch between two basses or between upright and electric. It has an effects loop with a footswitch, a clean boost and a piezo input for upright bass.
- Two-channel preamp for one or two basses
- Shared effects loop with footswitch and wet/dry blend
- Variable clean boost, switchable to a mute for tuning
- Three-band EQ and high-pass filter for upright bass
- PZB booster and piezo input for upright bass
- Built-in Radial DI with balanced PA output
Fotos
5Anúncios
Ainda não há anúncios deste modelo
Quando alguém vender um Bassbone V2, os anúncios e o histórico de vendas aparecem aqui.
Vender um igualDescrição
The Bassbone V2 is a preamp for one or two basses on stage or in the studio. Channel 1 can be left flat or set to one of two modern presets, while channel 2 has a three-band EQ for matching a second instrument to the first. A high-pass filter and a high-impedance input suit upright bass, and a PZB booster with a piezo input is included for that instrument.
A shared effects loop is switched with a footswitch and can be assigned to either input or shared across both. A wet/dry control blends the unprocessed bass signal with the output of the pedals. The clean boost has variable level and is also switched by footswitch, and it can be reconfigured as a mute switch for silent tuning.
A built-in Radial DI provides a balanced output for the PA, so a separate direct signal can go to the house system while the amp receives its own feed. A power supply is included.
Vídeo
Especificações
- Marca
- Radial Engineering
- Modelo
- Bassbone V2
- Categoria
- Efeitos e pedais
Inputs
- Channels
- 2
- Instrument support
- 1 or 2 basses
- Upright bass input
- Piezo input (high impedance)
Outputs
- PA output
- Balanced, via built-in Radial DI
Audio
- Channel 1 tone
- Flat or two modern presets
- Channel 2 EQ
- 3-band
- High-pass filter
- Yes
- Clean boost
- Variable, footswitchable; can be set as mute switch
- PZB booster
- Yes
Effects loop
- Loop
- Shared effects loop with footswitch
- Assignment
- Channel 1, channel 2 or both
- Wet/dry control
- Yes
Power
- Power supply
- Included (R800 9415)
Physical
- Part number
- R800 7071 00
- Type
- Bass preamp and boost
In the box
- Included
- Power supply (R800 9415)